Abbasbandy, S.
Determine the Efficiency of Time Depended Units by Using Data Envelopment Analysis [Volume 6, Issue 3, 2017, Pages 193-201]
Abbasi, Azad
Optimizing Supermarket Supply Chain using fuzzy AHP: A Study on Save 'n' Safe in Bangladesh [Volume 8, Issue 3, 2019, Pages 225-242]
Abbasi, Masomeh
A neutral DEA model for cross-efficiency evaluation [Volume 11, Issue 4, 2022, Pages 411-422]
Abbasi, Meysam
Customer segmentation to identify key customers based on RFM model by using data mining techniques [Volume 11, Issue 1, 2022, Pages 62-76]
Abbasi, Morteza
A new model for balancing between asset sharing risk and responsiveness: developing the augmented ɛ-constraint method [Volume 12, Issue 2, 2023, Pages 106-128]
Abbasimehr, H.
A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]
Abdel Khalek, M. A.
Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]
Abd El-Wahed Khalifa, H.
A signed distance method for solving multi-objective transportation problems in fuzzy environment [Volume 8, Issue 3, 2019, Pages 274-282]
Abdulrahman, Abdulrakib
A proportionately increased small and equal batch delivery under consignment stock agreement for a single vendor, multiple buyers supply chain system [Volume 12, Issue 4, 2023, Pages 414-430]
Abdulrazak, R.
[0,1] Truncated Fréchet-Weibull and Fréchet Distributions [Volume 7, Issue 1, 2018, Pages 106-135]
Abedin, Ahsanul
Improvement of overall equipment efficiency with root cause analysis and TPM strategy: a case study [Volume 12, Issue 3, 2023, Pages 205-220]
Abedzadeh, M.
Closed-Loop Supply Chain Network with Green Supplier Selection and Disassembly of Products: A Bi-Objective Model [Volume 2, Issue 4, 2013, Pages 58-71]
Abid, S.
[0,1] Truncated Fréchet-Weibull and Fréchet Distributions [Volume 7, Issue 1, 2018, Pages 106-135]
Abolhasani Ashkezari, H.
A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]
Abolhasani Ashkezari, M.H.
A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]
Abolhasani Ashkezari, M.H.
A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]
Abolhasani-Ashkezari, M.H.
Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]
Adabavazeh, Nazila
A Fuzzy BWM Approach to Prioritize Distribution Network Enablers [Volume 11, Issue 4, 2022, Pages 349-365]
Adam, M.
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
Adegbola, Kehinde
A proportionately increased small and equal batch delivery under consignment stock agreement for a single vendor, multiple buyers supply chain system [Volume 12, Issue 4, 2023, Pages 414-430]
Adeniran, A.
Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]
Adeniran, A. O
Concessioning a Strategy for Enhancing Nigeria’s Airport Operational Efficiency - Lessons from Developed Countries [Volume 6, Issue 3, 2017, Pages 228-245]
Adetayo Adeniran, A.
Trend extrapolation of domestic air travel demand in Nigeria (2018-2030) [Volume 7, Issue 4, 2018, Pages 468-481]
Afsahi, A.
Evaluating the Implementation of Strategies in Plants Using Balanced Scorecard (BSC): A Case Study [Volume 6, Issue 1, 2017, Pages 39-50]
Afzali, Parvaneh
Leveraging deep feature learning for handwriting biometric authentication [Volume 13, Issue 1, 2024, Pages 88-103]
Aggarwal, D.
Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]
Aggarwal, D.
A short communication article on contactless menu [Volume 9, Issue 4, 2020, Pages 313-317]
Aghajani, A.
Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]
Aghamohamadi, S.
A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]
Aghamohamadi-Bosjin, S.
Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]
Aghayari, Jamal
The impact of digital transformation on sustainability: a case of the Iranian telecom industry [Volume 12, Issue 3, 2023, Pages 306-320]
Aghezzaf, B.
Collaborative Information System for Managing the Supply Chain: Architecture Based on a Multi Agent System [Volume 2, Issue 2, 2013, Pages 1-16]
Aghsami, A.
Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]
Ahang, Farahnaz
Customer segmentation to identify key customers based on RFM model by using data mining techniques [Volume 11, Issue 1, 2022, Pages 62-76]
Ahmadi Choukolaei, Hassan
Assessing the location of relief centers using a combination of multi-criteria decision-making methods and gis (case study: district 18 of tehran) [Volume 11, Issue 1, 2022, Pages 16-29]
Ahmed, Rumaisa
Fabrication and process parameter optimization of a 3d printer using response surface methodology [Volume 10, Issue 3, 2021, Pages 238-250]
Ahmed, S. M.
An optimization model for aggregate production planning and control: a genetic algorithm approach [Volume 8, Issue 3, 2019, Pages 203-224]
Ahmed, T.
Application of line balancing heuristics for achieving an effective layout: a case study. [Volume 9, Issue 2, 2020, Pages 114-129]
Ajalli, Mehdi
The Optimization Model for Allocating Reward to Employees using GAHP and Cluster Analysis [(Articles in Press)]
Akash, S. M.
A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]
Alam, Sh. T.
Formulation of a customer-oriented product and determination of optimum design parameters using response surface methodology [Volume 9, Issue 4, 2020, Pages 349-363]
Alam, Shahriar Tanvir
An empirical analysis of exact algorithms for solving non-preemptive flow shop scheduling problem [Volume 11, Issue 3, 2022, Pages 306-321]
Alam Tabriz, A.
Solving a new multi-objective resource constrained project scheduling problem by SAICA and compare it with DE method [Volume 7, Issue 2, 2018, Pages 147-183]
Alavi Matın, Yaguoob
Identifying key indicators for developing the use of blockchain technology in financial systems [Volume 11, Issue 3, 2022, Pages 244-257]
Alavi mofrad, M.
A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]
Alborzi, Mahmood
The impact of digital transformation on sustainability: a case of the Iranian telecom industry [Volume 12, Issue 3, 2023, Pages 306-320]
Ali, A. Y.
Application of total productive maintenance in service organization [Volume 8, Issue 2, 2019, Pages 176-186]
Ali, A. Y.
Implementation of Six Sigma DMAIC methodology for increasing the competitiveness of SMEs in Ethiopia [Volume 10, Issue 1, 2021, Pages 1-8]
Ali, Abdella Yimam
Greedy algorithm for solving student allocation problem in internship program: a case study [Volume 10, Issue 2, 2021, Pages 155-164]
Ali, A. Y.
Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]
Ali, M. I.
Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]
Aliari-Kardehdeh, S.
Dynamic Pricing Decisions for Substitutable Products [Volume 6, Issue 2, 2017, Pages 149-160]
Alizadeh, S.
A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]
Aluvihara, S.
Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]
Amindoust, Atefeh
A Fuzzy BWM Approach to Prioritize Distribution Network Enablers [Volume 11, Issue 4, 2022, Pages 349-365]
Amini, Mohamad Hosein
Application of Circular Economy for Sustainable Waste Management in the Carpet Industry [(Articles in Press)]
Amin-Tahmasbi, H.
Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]
Amirafshari, M.
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]
Amiri, B.
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
Amiri, Hasan
Designing a model for creating an organization with high reliability, case study: Iran space research institute [Volume 11, Issue 1, 2022, Pages 30-49]
Amiri, Maghsoud
Identifying effective factors of organizational resilience: a meta-synthesis study [Volume 12, Issue 2, 2023, Pages 177-196]
Amirteimoori, Alireza
Identification and evaluation of congestion in two-stage network data envelopment analysis [Volume 12, Issue 1, 2023, Pages 53-72]
Amirzadeh, V.
A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]
Andalib Ardakani, davod
An Interval Type-2 Fuzzy AHP Approach for Success Factors of Green Supply Chain Management [(Articles in Press)]
Arabzad, S. M.
Fuzzy Goal Programming for Linear Facility Location-Allocation in a Supply Chain; The Case of Steel Industry [Volume 6, Issue 2, 2017, Pages 90-105]
Arbabi, H.
A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]
Arefin, Md. Rajib
An empirical analysis of exact algorithms for solving non-preemptive flow shop scheduling problem [Volume 11, Issue 3, 2022, Pages 306-321]
Ariafar, Shahram
Improving classic hungarian algorithm considering uncertainty by applying for grey numbers [Volume 12, Issue 3, 2023, Pages 321-336]
Ashjari, B.
Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]
Ashoori, M.
Applying the Process Mining Project Methodology for Insurance Risks Reduction [Volume 3, Issue 4, 2014, Pages 57-69]
Asif, Md. Kawsar Ahmed
An empirical analysis of exact algorithms for solving non-preemptive flow shop scheduling problem [Volume 11, Issue 3, 2022, Pages 306-321]
Askarzadeh, H. R.
Optimum solar and wind model with particle optimization (PSO) [Volume 7, Issue 4, 2018, Pages 460-467]
Awgichew, G.
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
Ayazi-Yazdi, S.
Dynamic Pricing Decisions for Substitutable Products [Volume 6, Issue 2, 2017, Pages 149-160]
Azizi Javan, E.
A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]
B
Babakordi, F.
Calculation of fuzzy matrices determinant [Volume 8, Issue 3, 2019, Pages 254-261]
Babazadeh, Yousef
Identifying key indicators for developing the use of blockchain technology in financial systems [Volume 11, Issue 3, 2022, Pages 244-257]
Bado, Hawa
Solving semi-fully fuzzy linear programming problems [Volume 10, Issue 3, 2021, Pages 251-275]
Bagheri, Afsaneh
Entrepreneurial team characteristics, social interactions, and the success of information technology start-ups [Volume 11, Issue 3, 2022, Pages 224-243]
Bagheri, S. F.
Evaluation of the efficiency by DEA a case study of hospital [Volume 8, Issue 3, 2019, Pages 283-293]
Bagheri, S. F.
Integrated and periodic relief logistics planning for reaction phase in uncertainty condition and model solving by PSO algorithm [Volume 8, Issue 4, 2019, Pages 294-311]
Bagherzadeh Valami, H.
Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]
Bagherzadeh Valami, H.
Performance Evaluation Function for Benchmarking Process Using Context-Dependent Data Envelopment Analysis [Volume 1, Issue 1, 2012, Pages 19-28]
Bagherzadeh Valami, Hadi
Classifications of linking activities based on their inefficiencies in Network DEA [Volume 12, Issue 2, 2023, Pages 165-176]
Bajaj, A.
The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]
Bakhshi, M.
Applying mathematical modeling to create job rotation for improve workforce performance in semi-automatic systems [Volume 9, Issue 4, 2020, Pages 318-327]
Balaei, Sirous
Designing a hybrid model for the green supply chain in Gilan Steel Industry [Volume 12, Issue 1, 2023, Pages 73-87]
Banimahd, Bahman
Ranking of companies in generating operating cash flows based on data envelopment analysis [Volume 12, Issue 4, 2023, Pages 364-374]
Barghi Mogaddam, Jaffar
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Barimani, M.
Economical Evaluation of Subsidy Omitting Effect on the Renewable Energy Position in Power Generation in Iran [Volume 2, Issue 2, 2013, Pages 17-34]
Barzegar, M.
Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]
Bazargan, Amir Reza
Technical analysis of petrochemical industries of Iran using a network data envelopment analysis model [Volume 12, Issue 4, 2023, Pages 337-363]
Behnampour, A.
Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]
Beigzadeh, Farzaneh
Designing a model for creating an organization with high reliability, case study: Iran space research institute [Volume 11, Issue 1, 2022, Pages 30-49]
Belay, G. F.
Energy wastage on an automobile due to speed breakers: a case study on Woldia town [Volume 9, Issue 2, 2020, Pages 202-208]
Ben Salem, Chokri
A numerical investigation on the springback in air v-bending of aluminum 1050 A [Volume 11, Issue 2, 2022, Pages 119-133]
Bensassi, B.
Collaborative Information System for Managing the Supply Chain: Architecture Based on a Multi Agent System [Volume 2, Issue 2, 2013, Pages 1-16]
Berhane, T.
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
Bharathi, D.
Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]
Biswas, T. K.
A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]
Biswas, T. K.
An optimization model for aggregate production planning and control: a genetic algorithm approach [Volume 8, Issue 3, 2019, Pages 203-224]
Bole, Boka Kumsa
Optimal control strategy on the transmission dynamics of human papillomavirus (HPV) and human immunodeficiency viruses (HIV) coinfection [Volume 10, Issue 4, 2021, Pages 318-331]
Bolhasani, p.
Solving a new multi-objective resource constrained project scheduling problem by SAICA and compare it with DE method [Volume 7, Issue 2, 2018, Pages 147-183]
Bonyadi Naeini, A.
An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]
Boyer Hassani, Omid
Development a forward-reverse network optimization model with delay reduction and multistage fuzzy demand satisfaction policy [Volume 12, Issue 4, 2023, Pages 375-387]
Bozorgi-Amiri, A.
A Robust Stochastic Programming Approach for Blood Collection and Distribution Network Design [Volume 3, Issue 2, 2014, Pages 1-11]
Bozorgi-Amiri, Ali
How metaheuristic algorithms can help in feature selection for Alzheimer’s diagnosis [Volume 12, Issue 2, 2023, Pages 197-204]
C
Canpolat, Onur
Prediction of Stress Concentration Factor in Butt Welding Joints using Artificial Neural Networks [Volume 12, Issue 1, 2023, Pages 43-52]
Chakrabarty, N.
Implementation of fuzzy rule-based algorithms in p control chart to improve the performance of statistical process control [Volume 7, Issue 4, 2018, Pages 441-459]
Chalapathi, T.
Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]
Chansamut, Artaphon
Information system model for educational management in supply chain for Thai higher education institutions [Volume 10, Issue 2, 2021, Pages 87-94]
Chansamut, Artaphon
Supply chain management information system model for quality assurance in educational management for ASEAN University network quality assurance (AUN-QA) [Volume 10, Issue 4, 2021, Pages 307-317]
Chawasemerwa, T.
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Chike, U. G.
Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]
Chiniforooshan, P.
A Novel Discrete Electromagnetism-Like for Fuzzy Open Shop Scheduling Problem with Parallel Machines to Minimize Makespan [Volume 1, Issue 3, 2012, Pages 1-25]
Chiniforooshan, P.
A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]
Chitra, K.
Scheduling Project Crashing Time Using Linear Programming Approach: Case Study [Volume 6, Issue 4, 2017, Pages 283-292]
Cyrus, K.M.
Robust Design of Maintenance Scheduling Considering Engineering Insurance Using Genetic Algorithm [Volume 3, Issue 1, 2014, Pages 39-48]
D
Dachry, W.
Collaborative Information System for Managing the Supply Chain: Architecture Based on a Multi Agent System [Volume 2, Issue 2, 2013, Pages 1-16]
Daneshian, Behrouz
A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]
Daniel, T.
Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]
Darvishi, Davood
Assessing the location of relief centers using a combination of multi-criteria decision-making methods and gis (case study: district 18 of tehran) [Volume 11, Issue 1, 2022, Pages 16-29]
Das, S. K.
Modified Method for Solving Fully Fuzzy Linear Programming Problem with Triangular Fuzzy Numbers [Volume 6, Issue 4, 2017, Pages 293-311]
Das, S. K.
Modified solution for neutrosophic linear programming problems with mixed constraints [Volume 9, Issue 1, 2020, Pages 13-24]
Das, S.K.
A MOLFP Method for Solving Linear Fractional Programming Under Fuzzy Environment [Volume 6, Issue 3, 2017, Pages 202-213]
Dash, J. K.
Modified solution for neutrosophic linear programming problems with mixed constraints [Volume 9, Issue 1, 2020, Pages 13-24]
Dastoori, Mojtaba
Developing a content marketing model with goal to improve brand of countrywide the banking industriestitle [Volume 11, Issue 1, 2022, Pages 50-61]
Datta, Ms. B.
Ergonomic furniture design for secondary girls school in Bangladesh [Volume 8, Issue 2, 2019, Pages 187-202]
Dehghanian, F.
An Interdiction Median Model for Hierarchical Capacitated Facilities [Volume 3, Issue 1, 2014, Pages 1-10]
Dehghani Filabadi, Ali
Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables [Volume 10, Issue 2, 2021, Pages 138-154]
Deshpande, H.
Comparative analysis on YOLO object detection with OpenCV [Volume 9, Issue 1, 2020, Pages 46-64]
Deshpande, H.
Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]
Deshpande, Prabhakar V
Industrial engineering is a mindset, not a methodology [Volume 11, Issue 3, 2022, Pages 322-326]
Deshpande, Prabhakar V
New Course in Industrial Engineering Education Curriculum [Volume 12, Issue 1, 2023, Pages 1-6]
Devnath, A.
An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]
Dezhdar, H.
Applying mathematical modeling to create job rotation for improve workforce performance in semi-automatic systems [Volume 9, Issue 4, 2020, Pages 318-327]
Dingping, Wu
Some results on (c)-mapping [Volume 10, Issue 3, 2021, Pages 276-285]
Doroudi, Homa
Designing a hybrid model for the green supply chain in Gilan Steel Industry [Volume 12, Issue 1, 2023, Pages 73-87]
E
Ebadi, Sh.
A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]
Ebrahimi, Seyed Mohsen
Designing the multivariate nonconforming proportion control charts considering the measurement error [Volume 10, Issue 4, 2021, Pages 295-306]
Edalatpanah, Seyyed Ahmad
Toward characterizing solutions to complex programming problems involving fuzzy parameters in constraints [Volume 13, Issue 1, 2024, Pages 62-70]
Ehsani, Ali
Identifying and prioritizing technology capability drivers in the supply chain using the fuzzy hierarchical analysis process (Case study: Iran Khodro and Saipa Automotive Company) [Volume 12, Issue 1, 2023, Pages 88-105]
Ehsanifar, M.
Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]
Ehtesham Rasi, R.
Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]
Ejigu, M. A.
Excessive sound noise risk assessment in textile mills of an Ethiopian-Kombolcha textile industry share company [Volume 8, Issue 2, 2019, Pages 105-114]
Ejlali, B.
Integrated and periodic relief logistics planning for reaction phase in uncertainty condition and model solving by PSO algorithm [Volume 8, Issue 4, 2019, Pages 294-311]
Ejlaly, B.
Evaluation of the efficiency by DEA a case study of hospital [Volume 8, Issue 3, 2019, Pages 283-293]
Eki, Martins Ufuoma
Parametric Optimization (GMAW) for the improvement of Mild Steel weld strength using Response Surface Technique [Volume 11, Issue 4, 2022, Pages 390-398]
El-Araby, Ahmed
The utilization of MARCOS method for different engineering applications: a comparative study [Volume 12, Issue 2, 2023, Pages 155-164]
El-Hosiny, F. I.
Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]
El-taweel, Y.
Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]
Erkan, Enes Furkan
Prediction of Stress Concentration Factor in Butt Welding Joints using Artificial Neural Networks [Volume 12, Issue 1, 2023, Pages 43-52]
Eskandari, Sadegh
PyIT-MLFS: a Python-based information theoretical multi-label feature selection library [Volume 11, Issue 1, 2022, Pages 9-15]
Esmaeili, H.
Reviewing on Nanotechnology for Creating Antimicrobial for Chicken Feed: Max-Min Optimization Approach [Volume 6, Issue 4, 2017, Pages 312-327]
Esmaili Dooki, A.
Solving a new multi-objective resource constrained project scheduling problem by SAICA and compare it with DE method [Volume 7, Issue 2, 2018, Pages 147-183]
Ezzati, R.
CAS Wavelet Function Method for Solving Abel Equations with Error Analysis [Volume 6, Issue 4, 2017, Pages 350-364]
F
Fadare, S. O.
Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]
Fakhrehosseini, S. F.
Selecting the optimal industrial investment by multi-criteria decision-making methods with emphasis on, TOPSIS, VIKOR, and COPRAS (case study of Guilan province) [Volume 8, Issue 4, 2019, Pages 312-324]
Fallah, M.
Efficiency Evaluation and Ranking of the Research Center at the Ministry of Energy: A Data Envelopment Analysis Approach [Volume 1, Issue 1, 2012, Pages 10-18]
Fallah, M.
Carbon Based Closed-Loop Supply Chain Design under Uncertainty using an Interval-Valued Fuzzy Stochastic Programming Approach [Volume 3, Issue 3, 2014, Pages 24-48]
Fallah, M.
A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]
Fallah, Mohammad
Technical analysis of petrochemical industries of Iran using a network data envelopment analysis model [Volume 12, Issue 4, 2023, Pages 337-363]
Farahbakhsh, Amin
A new efficient genetic algorithm-Taguchi-based approach for multi-period inventory routing problem [Volume 12, Issue 4, 2023, Pages 397-413]
Farahi, Khosro
Identifying and ranking the effective financial factors on rural entrepreneurial small businesses [Volume 13, Issue 1, 2024, Pages 1-10]
Farajollahzadeh, B.
Performance Evaluation Function for Benchmarking Process Using Context-Dependent Data Envelopment Analysis [Volume 1, Issue 1, 2012, Pages 19-28]
Farhang Moghaddam, B.
Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]
Faridi Masooleh, Marzieh
Data mining and diagnosis of heart diseases: a hybrid approach to the b-mine algorithm and association rules [Volume 11, Issue 1, 2022, Pages 77-91]
Farrokhi-Asl, H.
Solving a Bi-Objective Transportation Vehicle Routing Problem for Waste Collection by a New Hybrid Algorithm [Volume 5, 1(4), 2016, Pages 16-42]
Farrokhi-Asl, H.
Dynamic Pricing Decisions for Substitutable Products [Volume 6, Issue 2, 2017, Pages 149-160]
Farrokhi-Asl, H.
A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]
Farrokhi-Asl, H.
Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]
Farsijani, H.
The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]
Farughi, H.
Contractor Selection Using Fuzzy Hybrid AHP-VIKOR [Volume 2, Issue 4, 2013, Pages 26-40]
Fatahi, A.A.
Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]
Fathi Hafshejani, Kiamars
Identifying effective factors of organizational resilience: a meta-synthesis study [Volume 12, Issue 2, 2023, Pages 177-196]
Fathizadeh, E.
CAS Wavelet Function Method for Solving Abel Equations with Error Analysis [Volume 6, Issue 4, 2017, Pages 350-364]
Fazle Rabbi, Md.
Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]
Fegh-hi Frahamand, Naser
Identifying key indicators for developing the use of blockchain technology in financial systems [Volume 11, Issue 3, 2022, Pages 244-257]
Forghani, A.
An Interdiction Median Model for Hierarchical Capacitated Facilities [Volume 3, Issue 1, 2014, Pages 1-10]
Furtado, F.
Movie recommendation system using machine learning [Volume 9, Issue 1, 2020, Pages 84-98]
Furtado, F.
Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]
G
Garside, A. K.
An optimization model for cold chain food distribution [Volume 8, Issue 3, 2019, Pages 243-253]
Gauri, S.
Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]
Gauri, S. Kumar
A note on the generalized indices of process capability [Volume 9, Issue 3, 2020, Pages 286-303]
Gbadamosi, K. T.
Concessioning a Strategy for Enhancing Nigeria’s Airport Operational Efficiency - Lessons from Developed Countries [Volume 6, Issue 3, 2017, Pages 228-245]
Gelard, Parvaneh
Identifying and ranking the effective financial factors on rural entrepreneurial small businesses [Volume 13, Issue 1, 2024, Pages 1-10]
Ghaffari, Hassan
Customer segmentation to identify key customers based on RFM model by using data mining techniques [Volume 11, Issue 1, 2022, Pages 62-76]
Ghahremani Nahr, Javid
Modeling of the supply chain of cooperative game between two tiers of retailer and manufacturer under conditions of uncertainty [Volume 10, Issue 2, 2021, Pages 95-116]
Ghanbari Talouki, A.
Improvement in video inpainting in presence of moving subjects [Volume 8, Issue 4, 2019, Pages 325-338]
Ghasemi, Sh.
Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]
Ghassemi Tari, F.
Multi-objective sequence dependent setup times hybrid flowshop scheduling: A literature review [Volume 7, Issue 3, 2018, Pages 254-306]
Ghavidel, F.
Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]
Ghayebloo, S.
Closed-Loop Supply Chain Network with Green Supplier Selection and Disassembly of Products: A Bi-Objective Model [Volume 2, Issue 4, 2013, Pages 58-71]
Ghaziyani, Kh.
Evaluation of the efficiency by DEA a case study of hospital [Volume 8, Issue 3, 2019, Pages 283-293]
Ghaziyani, Kh.
Integrated and periodic relief logistics planning for reaction phase in uncertainty condition and model solving by PSO algorithm [Volume 8, Issue 4, 2019, Pages 294-311]
Gheidar-Kheljani, Jafar
A new model for balancing between asset sharing risk and responsiveness: developing the augmented ɛ-constraint method [Volume 12, Issue 2, 2023, Pages 106-128]
Gholamian, S. A.
Optimal Design of PM Synchronous Generator for Aerial Industries Power Supply Using Cuckoo Algorithm [Volume 3, Issue 3, 2014, Pages 49-68]
Ghomashi Langroudi, Abbas
A neutral DEA model for cross-efficiency evaluation [Volume 11, Issue 4, 2022, Pages 411-422]
Ghomi, M.
Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]
Ghorbani, M.
Fuzzy Goal Programming for Linear Facility Location-Allocation in a Supply Chain; The Case of Steel Industry [Volume 6, Issue 2, 2017, Pages 90-105]
Ghorbanpur, Ahmad
Analysis of the LARG of the hospital medical equipment supply chain using the fuzzy inference system [Volume 13, Issue 2, 2024, Pages 116-151]
Givehchi, S.
A New Bargaining Game Model for Measuring Performance of Two-Stage Network Structures [Volume 1, Issue 2, 2012, Pages 27-39]
Gohari, F. S.
Classification and Comparison of the Hybrid Collaborative Filtering Systems [Volume 6, Issue 2, 2017, Pages 129-148]
Golestaneh, R.
Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]
Golpîra, H.
A New Method to Organizational Ranking: Integrating BSC and DEA [Volume 1, Issue 3, 2012, Pages 39-47]
Golpira, H.
Estimating Duration of Projects Manual Tasks Using MODAPTS plus Method [Volume 2, Issue 1, 2013, Pages 12-19]
Golpira, H.
A Method for Evaluating Project Management Standards, Based on EFQM Criteria, Using FTOPSIS Method [Volume 3, Issue 3, 2014, Pages 1-12]
Golpira, H.
Competition in Supply Chain Network: Retailers’ Risk Averseness Approach [Volume 6, Issue 2, 2017, Pages 121-128]
Goodarzi, Keivan
Developing a content marketing model with goal to improve brand of countrywide the banking industriestitle [Volume 11, Issue 1, 2022, Pages 50-61]
Gotami, Metta
Improving the performance of planning and controlling raw material inventory in food industry [Volume 10, Issue 4, 2021, Pages 332-345]
Gupta, H.
Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]
Gupta, Himadri Sen
Analyzing the Impact of 5S implementation in the manufacturing department: a case study [Volume 10, Issue 4, 2021, Pages 286-294]
Gurmu, Eshetu Dadi
Optimal control strategy on the transmission dynamics of human papillomavirus (HPV) and human immunodeficiency viruses (HIV) coinfection [Volume 10, Issue 4, 2021, Pages 318-331]
H
Habiba, Umme
Optimization of a green supply chain network: a case study in a pharmaceutical industry [Volume 10, Issue 3, 2021, Pages 174-186]
Haghighi, D.
Identifying Buyer-Supplier Conflict in Collaborative Process New Product Development [Volume 3, Issue 2, 2014, Pages 12-23]
Haile, E.
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
Hajiaghaei-Keshteli, M.
Solving Fuzzy Step Fixed Charge Transportation Problems via Metaheuristics [Volume 2, Issue 3, 2013, Pages 24-34]
Hajinia Leilabadi, Sh.
Modeling the Quality and Reliability Dependent Customer Satisfaction in Healthcare [Volume 3, Issue 2, 2014, Pages 33-45]
Haldar, S.
A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 7, Issue 4, 2018, Pages 423-440]
Halder, P.
Scheduling Project Crashing Time Using Linear Programming Approach: Case Study [Volume 6, Issue 4, 2017, Pages 283-292]
Halder, P. K.
Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]
Hami, M.
Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]
Hamid, M.
A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]
Hamidavi Nasab, Yaser
Identifying effective factors of organizational resilience: a meta-synthesis study [Volume 12, Issue 2, 2023, Pages 177-196]
Hamidieh, Alireza
Blood supply chain network design considering responsiveness and reliability in conditions of uncertainty using the lagrangian relaxation algorithm [Volume 11, Issue 2, 2022, Pages 188-204]
Hartmann, D.
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Hasan, K.
Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]
Hasan, Md.
Ergonomic furniture design for secondary girls school in Bangladesh [Volume 8, Issue 2, 2019, Pages 187-202]
Hasan, Md. Nazmul
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Hashemi, S. E.
Applying mathematical modeling to create job rotation for improve workforce performance in semi-automatic systems [Volume 9, Issue 4, 2020, Pages 318-327]
Hashemianfar, M. R.
Integrated model of critical success factors of construction projects: A case of Esfahan [Volume 7, Issue 3, 2018, Pages 381-395]
Hassanpour, M.
Evaluation of Iranian automotive industries [Volume 8, Issue 2, 2019, Pages 115-139]
Hassanzadeh, A.
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
Hatami, A.
Fuzzy Big-M Method for Solving Fuzzy Linear Programs with Trapezoidal Fuzzy Numbers [Volume 2, Issue 3, 2013, Pages 1-9]
Hemati, S.
A New Bargaining Game Model for Measuring Performance of Two-Stage Network Structures [Volume 1, Issue 2, 2012, Pages 27-39]
Herunde, H.
Comparative analysis on YOLO object detection with OpenCV [Volume 9, Issue 1, 2020, Pages 46-64]
Herunde, H.
Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]
Herunde, H.
Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]
Hesamian, Gholamreza
Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables [Volume 10, Issue 2, 2021, Pages 138-154]
Heydari Alvar, M.
A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]
Hoseini, S. M.
Optimal Design of PM Synchronous Generator for Aerial Industries Power Supply Using Cuckoo Algorithm [Volume 3, Issue 3, 2014, Pages 49-68]
Hoseini Tabatabaei, Seyed Alireza
Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [Volume 10, Issue 3, 2021, Pages 187-205]
Hossain, Mahmud
Selecting methodology for developing emergency preparedness and response framework of an NPP accident [Volume 11, Issue 1, 2022, Pages 1-8]
Hossain, Sk. R.
A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 7, Issue 4, 2018, Pages 423-440]
Hossain, U.
Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]
Hosseini, Seyed Hossein
Ranking of companies in generating operating cash flows based on data envelopment analysis [Volume 12, Issue 4, 2023, Pages 364-374]
Hosseini Imeni, S.A.
Fuzzy Index Tracking Portfolio Selection Model Based on Value-at-Risk [Volume 2, Issue 4, 2013, Pages 41-57]
Hosseiny, R.
A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]
Hosseinzadeh Lotfi, F
Data Envelopment Analysis Based on MPSS Efficient and Inefficient Frontiers [Volume 2, Issue 4, 2013, Pages 15-25]
Hosseinzadeh Lotfi, F
Carbon Based Closed-Loop Supply Chain Design under Uncertainty using an Interval-Valued Fuzzy Stochastic Programming Approach [Volume 3, Issue 3, 2014, Pages 24-48]
Hosseinzadeh Lotfi, F
Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]
Hosseinzadeh Lotfi, F
Assess the efficiency and effectiveness simultaneously in a three-stage process, by using a unified model [Volume 4, 1(4), 2015, Pages 15-23]
Hosseinzadeh Lotfi, F
The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]
Hosseinzadeh Lotfi, F.
A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]
Hosseinzadeh Lotfi, F.
A New Bargaining Game Model for Measuring Performance of Two-Stage Network Structures [Volume 1, Issue 2, 2012, Pages 27-39]
Hosseinzadeh Lotfi, F.
Determine the Efficiency of Time Depended Units by Using Data Envelopment Analysis [Volume 6, Issue 3, 2017, Pages 193-201]
Hosseinzadeh Lotfi, Farhad
Identification and evaluation of congestion in two-stage network data envelopment analysis [Volume 12, Issue 1, 2023, Pages 53-72]
Hosseinzadeh Lotfi, Farhad
Technical analysis of petrochemical industries of Iran using a network data envelopment analysis model [Volume 12, Issue 4, 2023, Pages 337-363]
Hosseinzadeh-Lotfi, F.
Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]
Hossen, Muhammed Mufazzal
Selecting methodology for developing emergency preparedness and response framework of an NPP accident [Volume 11, Issue 1, 2022, Pages 1-8]
Houshmand, M.
Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]
Houshmand, M.
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
Hridoy, R. M.
Application of line balancing heuristics for achieving an effective layout: a case study. [Volume 9, Issue 2, 2020, Pages 114-129]
I
Ikpe, Aniekan Essienubong
Design and Development of a Wind Turbine with Flanged Diffuser Operating in Low Wind Speed Regime [Volume 11, Issue 4, 2022, Pages 366-377]
Ikpe, Aniekan Essienubong
Thermodynamic analysis of hybrid-nanofluids-zeotropic mixtures in a vapour compression refrigeration system (VCRS) based on exergy principles [Volume 12, Issue 2, 2023, Pages 143-154]
Imani, Abdolmajid
Customer segmentation to identify key customers based on RFM model by using data mining techniques [Volume 11, Issue 1, 2022, Pages 62-76]
Imani, D. M.
Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]
Ishraq, Fatin
Fabrication and process parameter optimization of a 3d printer using response surface methodology [Volume 10, Issue 3, 2021, Pages 238-250]
Islam, E.
An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]
Islam, F.
Improvement of the student-teacher learning interface with selecting and designing a teaching method [Volume 9, Issue 3, 2020, Pages 247-259]
Islam, MD. Tanzil
Optimization of a green supply chain network: a case study in a pharmaceutical industry [Volume 10, Issue 3, 2021, Pages 174-186]
Islam, Md. S.
Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]
Islam, Md. S.
An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]
Istiak, Md. N.
Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study [Volume 8, Issue 2, 2019, Pages 140-157]
J
Jafari, A.
A Novel Discrete Electromagnetism-Like for Fuzzy Open Shop Scheduling Problem with Parallel Machines to Minimize Makespan [Volume 1, Issue 3, 2012, Pages 1-25]
Jafari, A.
A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]
Jafari, A.
Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]
Jafari, H.
Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]
Jafari, Hossein
Using a new algorithm to improve the search answer in quadratic assignment problem (QAP) [Volume 10, Issue 2, 2021, Pages 165-173]
Jafari, R.
Solving FMS Assignment Problem with Grouping Genetic Algorithm [Volume 1, Issue 3, 2012, Pages 60-68]
Jahan, Sohana
An empirical analysis of exact algorithms for solving non-preemptive flow shop scheduling problem [Volume 11, Issue 3, 2022, Pages 306-321]
Jahanbakhsh, M.
Assess the efficiency and effectiveness simultaneously in a three-stage process, by using a unified model [Volume 4, 1(4), 2015, Pages 15-23]
Jahanshahloo, G.R.
A New Bargaining Game Model for Measuring Performance of Two-Stage Network Structures [Volume 1, Issue 2, 2012, Pages 27-39]
Jahromi, M.H.M.A.
Solving FMS Assignment Problem with Grouping Genetic Algorithm [Volume 1, Issue 3, 2012, Pages 60-68]
Jalili, A.
The Impact of Total Quality Management on Organizational Innovation [Volume 2, Issue 1, 2013, Pages 1-11]
Jamali, Gholamreza
Analysis of the LARG of the hospital medical equipment supply chain using the fuzzy inference system [Volume 13, Issue 2, 2024, Pages 116-151]
Jamshidi, Rasoul
Application of accelerated life testing in human reliability analysis [Volume 10, Issue 4, 2021, Pages 346-357]
Janani, Hamid
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Janatyan, N.
Integrated model of critical success factors of construction projects: A case of Esfahan [Volume 7, Issue 3, 2018, Pages 381-395]
Javadian, N.
Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]
Johari, Ali
Blood supply chain network design considering responsiveness and reliability in conditions of uncertainty using the lagrangian relaxation algorithm [Volume 11, Issue 2, 2022, Pages 188-204]
Jony, F. I.
Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]
Juybari, M. N.
Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]
K
Kabgani, Mohammad Hossein
Measuring effective indicators for waste disposal in order to assess the sustainable environment: application of fuzzy approach [Volume 12, Issue 3, 2023, Pages 287-305]
Kamal, Tamanna
Productivity optimization in the electronics industry using simulation-based modeling approach [Volume 13, Issue 2, 2024, Pages 104-115]
Kamali, S.K.
Study the Impact of Customer's Profile and Participation on the Performance of Customer Relationship Management in Service Organizations [Volume 1, Issue 1, 2012, Pages 29-41]
Kamfiroozi, M. H.
An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]
Kanagasabai, L.
Factual power loss reduction by augmented monkey optimization algorithm [Volume 9, Issue 1, 2020, Pages 1-12]
Kanagasabai, L.
Amplified black hole algorithm for real power loss reduction [Volume 9, Issue 2, 2020, Pages 130-142]
Kanagasabai, L.
Real power loss reduction by Acridoidea stirred artificial bee colony algorithm [Volume 9, Issue 3, 2020, Pages 209-215]
Karatop, Buket
Development of the field of organizational performance during the industry 4.0 period [Volume 11, Issue 2, 2022, Pages 134-154]
Karimi, H.
A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]
Karimi, H.
Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]
Karimi, Rasoul
A mathematical model of the location problem for central and secondary warehouses in the multi-level supply chain network of perishable products [Volume 13, Issue 1, 2024, Pages 11-24]
Karmaker, C. L.
A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 7, Issue 4, 2018, Pages 423-440]
Karmaker, C. L.
Determination of Optimum Smoothing Constant of Single Exponential Smoothing Method: A Case Study [Volume 6, Issue 3, 2017, Pages 184-192]
Karmarker, C. L.
Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]
Kasaee, M.
Integrated model of critical success factors of construction projects: A case of Esfahan [Volume 7, Issue 3, 2018, Pages 381-395]
Kashefi Neishabori, Mohammadreza
Developing a content marketing model with goal to improve brand of countrywide the banking industriestitle [Volume 11, Issue 1, 2022, Pages 50-61]
Kassaei, Sarvar Sadat
Identification and evaluation of congestion in two-stage network data envelopment analysis [Volume 12, Issue 1, 2023, Pages 53-72]
Kazemipoor, H.
Fuzzy Big-M Method for Solving Fuzzy Linear Programs with Trapezoidal Fuzzy Numbers [Volume 2, Issue 3, 2013, Pages 1-9]
Kazemipoor, H.
An integrated multi-objective mathematical model to select suppliers in green supply chains [Volume 9, Issue 3, 2020, Pages 216-234]
Kazemipoor, Hamed
A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery [Volume 11, Issue 3, 2022, Pages 273-305]
Keshavarz Dastak, S.
The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]
Keyghobadi, Amirreza
Identifying effective factors of organizational resilience: a meta-synthesis study [Volume 12, Issue 2, 2023, Pages 177-196]
Khalifa, H. A.
On solving two-person zero-sum fuzzy matrix games via linear programming approach [Volume 8, Issue 1, 2019, Pages 17-27]
Khalifa, Hamiden Abdelwahed
A signed distance for (γ,δ) interval-valued fuzzy numbers to solve multi objective assignment problems with fuzzy parameters [Volume 11, Issue 2, 2022, Pages 205-213]
Khalifa, Hamiden Abd El-Wahed
Toward characterizing solutions to complex programming problems involving fuzzy parameters in constraints [Volume 13, Issue 1, 2024, Pages 62-70]
Khalilzadeh, M.
Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]
Kheirkhah, Amir Saman
A new efficient genetic algorithm-Taguchi-based approach for multi-period inventory routing problem [Volume 12, Issue 4, 2023, Pages 397-413]
Kheyri, B.
How Implementation of E-CRM May Enhance an Organization’s Internal and External Success [Volume 1, Issue 2, 2012, Pages 58-71]
Khezri, A. H.
Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]
Khodashenas, Mohammad
A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery [Volume 11, Issue 3, 2022, Pages 273-305]
Khoshfetrat, S.
Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]
Kiakojouri, Davood
Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [Volume 10, Issue 3, 2021, Pages 206-222]
Kiani, Mehrdad
An Interval Type-2 Fuzzy AHP Approach for Success Factors of Green Supply Chain Management [(Articles in Press)]
Kibria, Md. G.
Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]
Kimiaei, M.
A Barzilai Borwein Adaptive Trust-Region Method for Solving Systems of Nonlinear Equation [Volume 6, Issue 4, 2017, Pages 339-349]
Kiraz, Alper
Prediction of Stress Concentration Factor in Butt Welding Joints using Artificial Neural Networks [Volume 12, Issue 1, 2023, Pages 43-52]
Kiraz, Alper
Development of a lean maturity assessment model using interval-valued spherical fuzzy AHP method [Volume 13, Issue 1, 2024, Pages 25-47]
Kiron, Asduzzaman
COVID-19 and food supply chain disruptions in Bangladesh: impacts and strategies [Volume 11, Issue 2, 2022, Pages 155-164]
Kordrostami, Sohrab
Data mining and diagnosis of heart diseases: a hybrid approach to the b-mine algorithm and association rules [Volume 11, Issue 1, 2022, Pages 77-91]
Kökümer, Onur
Prediction of Stress Concentration Factor in Butt Welding Joints using Artificial Neural Networks [Volume 12, Issue 1, 2023, Pages 43-52]
Koya, Purnachandra Rao
Optimal control strategy on the transmission dynamics of human papillomavirus (HPV) and human immunodeficiency viruses (HIV) coinfection [Volume 10, Issue 4, 2021, Pages 318-331]
Kumar, V.
The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]
Kumar-Das, S.
A new method for solving fuzzy linear fractional programming problem with new ranking function [Volume 8, Issue 4, 2019, Pages 384-393]
Kundu, B.
Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]
L
Lazar Farokhi, A.
Application of fuzzy AHP and TOPSIS methods for risk evaluation of gas transmission facility [Volume 8, Issue 4, 2019, Pages 339-365]
Li, Linxin
Some results on (c)-mapping [Volume 10, Issue 3, 2021, Pages 276-285]
Lingkon, Md. L. R.
Applying flexible job shop scheduling in patients management to optimize processing time in hospitals. [Volume 10, Issue 1, 2021, Pages 46-55]
Lingkon, Md. Limonur Rahman
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
M
Mafu, Mhlambululi
Harmonisation of the engineering disciplines enhanced by the learning factory [Volume 10, Issue 4, 2021, Pages 358-370]
Mahalanobish, Showra Kishore
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Mahmoud, A.
Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]
Mahmud, Sh.
Improvement of the student-teacher learning interface with selecting and designing a teaching method [Volume 9, Issue 3, 2020, Pages 247-259]
Mahzoun, Z.
How Implementation of E-CRM May Enhance an Organization’s Internal and External Success [Volume 1, Issue 2, 2012, Pages 58-71]
Majdi, M.
Improvement in video inpainting in presence of moving subjects [Volume 8, Issue 4, 2019, Pages 325-338]
Maleknejad, K.
CAS Wavelet Function Method for Solving Abel Equations with Error Analysis [Volume 6, Issue 4, 2017, Pages 350-364]
Malele, Vusumuzi
Harmonisation of the engineering disciplines enhanced by the learning factory [Volume 10, Issue 4, 2021, Pages 358-370]
Manavizadeh, N.
A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]
Mandal, T.
A MOLFP Method for Solving Linear Fractional Programming Under Fuzzy Environment [Volume 6, Issue 3, 2017, Pages 202-213]
Mansory, Ali
Evaluating of effective factors on green supply chain management using statistical methods and SWARA approach [Volume 11, Issue 2, 2022, Pages 165-187]
Manzid, Abdulla Al
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Mardi, M.
How Implementation of E-CRM May Enhance an Organization’s Internal and External Success [Volume 1, Issue 2, 2012, Pages 58-71]
Mardi, M.
Study the Impact of Customer's Profile and Participation on the Performance of Customer Relationship Management in Service Organizations [Volume 1, Issue 1, 2012, Pages 29-41]
Mehdi, Mohamad
Customer segmentation to identify key customers based on RFM model by using data mining techniques [Volume 11, Issue 1, 2022, Pages 62-76]
Mehdizadeh, Esmaeil
A vibration damping optimization algorithm to solve flexible job shop scheduling problems with reverse flows [Volume 12, Issue 4, 2023, Pages 431-449]
Mehrmanesh, Hassan
Identifying and prioritizing technology capability drivers in the supply chain using the fuzzy hierarchical analysis process (Case study: Iran Khodro and Saipa Automotive Company) [Volume 12, Issue 1, 2023, Pages 88-105]
Mesforoush, A.
Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]
Meslameni, Walid
A numerical investigation on the springback in air v-bending of aluminum 1050 A [Volume 11, Issue 2, 2022, Pages 119-133]
Mim, Tamanna Islam
COVID-19 and food supply chain disruptions in Bangladesh: impacts and strategies [Volume 11, Issue 2, 2022, Pages 155-164]
Mim, Tamanna Islam
Performance Prediction of Green Supply Chain Using Bayesian Belief Network: Case Study of a Textile Industry [Volume 11, Issue 4, 2022, Pages 327-348]
Mirmohseni, M.
A New Method for Solving Fully Fuzzy Multi Objective Supplier Selection Problem [Volume 6, Issue 3, 2017, Pages 214-227]
Mirzaei, S. H.
Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]
Mkrchyan, H.M.
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]
Modarres Yazdi, M.
Comprehensive Method to Determine Real Option Utilizing Probability Distribution [Volume 3, Issue 1, 2014, Pages 11-25]
Mofatehzadeh, Elham
An Interval Type-2 Fuzzy AHP Approach for Success Factors of Green Supply Chain Management [(Articles in Press)]
Moghaddam, P.
Customer Involvement in Innovation Process Based on Open Innovation Concepts [Volume 1, Issue 2, 2012, Pages 1-9]
Mohaghar, A.
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
Mohaghar, Ali
The joint policy of production, maintenance, and product quality in a multi-machine production system by reinforcement learning and agent-based modeling [Volume 13, Issue 1, 2024, Pages 71-87]
Mohajeri, A.
A New Method to Organizational Ranking: Integrating BSC and DEA [Volume 1, Issue 3, 2012, Pages 39-47]
Mohajeri, A.
Carbon Based Closed-Loop Supply Chain Design under Uncertainty using an Interval-Valued Fuzzy Stochastic Programming Approach [Volume 3, Issue 3, 2014, Pages 24-48]
Mohammad, P.
An integrated multi-objective mathematical model to select suppliers in green supply chains [Volume 9, Issue 3, 2020, Pages 216-234]
Mohammadi, Mahmoud
Identifying and prioritizing technology capability drivers in the supply chain using the fuzzy hierarchical analysis process (Case study: Iran Khodro and Saipa Automotive Company) [Volume 12, Issue 1, 2023, Pages 88-105]
Mohammadi, Nabiollah
Evaluating of effective factors on green supply chain management using statistical methods and SWARA approach [Volume 11, Issue 2, 2022, Pages 165-187]
Mohammadi, Nabiollah
Designing a hybrid model for the green supply chain in Gilan Steel Industry [Volume 12, Issue 1, 2023, Pages 73-87]
Mohammadi Andargoli, H.
A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]
Mohammadi Andargoli, H.
A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]
Mohammadi-Andargoli, H.
Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]
Mohammadpour, Zahra
Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [Volume 10, Issue 3, 2021, Pages 206-222]
Mokhtari karchegani, F.
A Multi-Objective Model for Location-Allocation Problem in a Supply Chain [Volume 4, 1(4), 2015, Pages 24-42]
Molaei, S.
Robust Design of Maintenance Scheduling Considering Engineering Insurance Using Genetic Algorithm [Volume 3, Issue 1, 2014, Pages 39-48]
Molavi, B.
Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]
Molla-Alizadeh-Zavardehi, S.
Solving Fuzzy Step Fixed Charge Transportation Problems via Metaheuristics [Volume 2, Issue 3, 2013, Pages 24-34]
Mondal, T. K.
Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]
Montazeri, F. Z.
The survey of data envelopment analysis models in fuzzy stochastic environments [Volume 8, Issue 4, 2019, Pages 366-383]
Monzeli, Abbasali
A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]
Moradi, N.
A simulated annealing optimization algorithm for equal and un-equal area construction site layout problem [Volume 8, Issue 2, 2019, Pages 89-104]
Morteznia, M.
A New Method for Solving Fully Fuzzy Multi Objective Supplier Selection Problem [Volume 6, Issue 3, 2017, Pages 214-227]
Mostofi, Shookoofa
Data mining and diagnosis of heart diseases: a hybrid approach to the b-mine algorithm and association rules [Volume 11, Issue 1, 2022, Pages 77-91]
Motamedi, Majid
A mathematical model of the location problem for central and secondary warehouses in the multi-level supply chain network of perishable products [Volume 13, Issue 1, 2024, Pages 11-24]
Mousavi, Seyyed Mostafa
A mathematical model of the location problem for central and secondary warehouses in the multi-level supply chain network of perishable products [Volume 13, Issue 1, 2024, Pages 11-24]
Mousavinejad, F.
A Novel Discrete Electromagnetism-Like for Fuzzy Open Shop Scheduling Problem with Parallel Machines to Minimize Makespan [Volume 1, Issue 3, 2012, Pages 1-25]
Mousazadeh, M.
A Robust Stochastic Programming Approach for Blood Collection and Distribution Network Design [Volume 3, Issue 2, 2014, Pages 1-11]
Movafaghpour, M.
Developing 360 degree performance evaluation method for school teachers [Volume 8, Issue 1, 2019, Pages 28-39]
Movahedi Sobhani, Farzad
A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery [Volume 11, Issue 3, 2022, Pages 273-305]
Movahedi Sobhani, Farzad
The joint policy of production, maintenance, and product quality in a multi-machine production system by reinforcement learning and agent-based modeling [Volume 13, Issue 1, 2024, Pages 71-87]
Mubiru, Kizito Paul
Modelling and optimization of residential electricity load under stochastic demand [Volume 13, Issue 1, 2024, Pages 48-61]
N
Naami, Abdollah
Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [Volume 10, Issue 3, 2021, Pages 187-205]
Naami, Abdollah
Developing a content marketing model with goal to improve brand of countrywide the banking industriestitle [Volume 11, Issue 1, 2022, Pages 50-61]
Naderi, A.
Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]
Naderi, B.
Modeling and Scheduling University Course Timetabling Problems [Volume 5, 1(4), 2016, Pages 1-15]
Naderi, Saeideh
Presentation a Multi-objective Optimization Model for Resource-Constrained Project Scheduling Regarding Financial Costs, Time Delays and the Reliability Function [(Articles in Press)]
Nagathan, P. S.
Influence of Wall Properties on the Peristaltic Flow of a Jeffrey Fluid in a Uniform Porous Channel under Heat Transfer [Volume 6, Issue 3, 2017, Pages 246-261]
Nahar, Kh.
Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]
Najafi, A.A.
A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]
Najafi, A.A.
Fuzzy Index Tracking Portfolio Selection Model Based on Value-at-Risk [Volume 2, Issue 4, 2013, Pages 41-57]
Najafi, S. E.
Competition in Supply Chain Network: Retailers’ Risk Averseness Approach [Volume 6, Issue 2, 2017, Pages 121-128]
Najafi, S.E.
Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]
Najafi, S.E.
Efficiency Evaluation and Ranking of the Research Center at the Ministry of Energy: A Data Envelopment Analysis Approach [Volume 1, Issue 1, 2012, Pages 10-18]
Najafi, S.E.
Performance Evaluation Function for Benchmarking Process Using Context-Dependent Data Envelopment Analysis [Volume 1, Issue 1, 2012, Pages 19-28]
Najafi, Seyed Esmaeil
The joint policy of production, maintenance, and product quality in a multi-machine production system by reinforcement learning and agent-based modeling [Volume 13, Issue 1, 2024, Pages 71-87]
Najafi, Seyed Esmaeel
A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery [Volume 11, Issue 3, 2022, Pages 273-305]
Najafi, Seyyed Esmaeil
Technical analysis of petrochemical industries of Iran using a network data envelopment analysis model [Volume 12, Issue 4, 2023, Pages 337-363]
Najafi, Seyyed Esmaeil
Classifications of linking activities based on their inefficiencies in Network DEA [Volume 12, Issue 2, 2023, Pages 165-176]
Najafzadeh, Mohammad Rahim
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Nasiri, Abbas
Evaluating of effective factors on green supply chain management using statistical methods and SWARA approach [Volume 11, Issue 2, 2022, Pages 165-187]
Nasiri, H.
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
Nassef, E.
Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]
Nasseri, H.
A New Method for Solving Fully Fuzzy Multi Objective Supplier Selection Problem [Volume 6, Issue 3, 2017, Pages 214-227]
Nayebi, M.
The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]
Nazabadi, Mohammad Reza
The joint policy of production, maintenance, and product quality in a multi-machine production system by reinforcement learning and agent-based modeling [Volume 13, Issue 1, 2024, Pages 71-87]
Negahban, Leila
Ranking of companies in generating operating cash flows based on data envelopment analysis [Volume 12, Issue 4, 2023, Pages 364-374]
Nickbeen, P.
Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]
Nikbakhsh, A.
Optimal Design of PM Synchronous Generator for Aerial Industries Power Supply Using Cuckoo Algorithm [Volume 3, Issue 3, 2014, Pages 49-68]
Nikbakht, Mehrdad
A Fuzzy BWM Approach to Prioritize Distribution Network Enablers [Volume 11, Issue 4, 2022, Pages 349-365]
Nikjo, B.
Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]
Nikkhah, A.
Evaluating the Implementation of Strategies in Plants Using Balanced Scorecard (BSC): A Case Study [Volume 6, Issue 1, 2017, Pages 39-50]
Nikkhah, M.
Evaluating the Implementation of Strategies in Plants Using Balanced Scorecard (BSC): A Case Study [Volume 6, Issue 1, 2017, Pages 39-50]
Niknamfar, A. H.
Reviewing on Nanotechnology for Creating Antimicrobial for Chicken Feed: Max-Min Optimization Approach [Volume 6, Issue 4, 2017, Pages 312-327]
Niknamfar, A. H.
Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]
Nisa Joti, Joytun
Fabrication and process parameter optimization of a 3d printer using response surface methodology [Volume 10, Issue 3, 2021, Pages 238-250]
Niyazi, M.
Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]
Noorossana, R.
Modeling the Quality and Reliability Dependent Customer Satisfaction in Healthcare [Volume 3, Issue 2, 2014, Pages 33-45]
Noshin, L.
Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]
Nozari, H.
A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]
Nundy, C. K.
An optimization model for aggregate production planning and control: a genetic algorithm approach [Volume 8, Issue 3, 2019, Pages 203-224]
Nurprihatin, Filscha
Improving the performance of planning and controlling raw material inventory in food industry [Volume 10, Issue 4, 2021, Pages 332-345]
Nzumile, J. M.
Assessing the awareness of local consumer’s product producers towards packaging standards in Tanzania [Volume 8, Issue 1, 2019, Pages 40-52]
O
Odeh, Emmanuel
Thermodynamic analysis of hybrid-nanofluids-zeotropic mixtures in a vapour compression refrigeration system (VCRS) based on exergy principles [Volume 12, Issue 2, 2023, Pages 143-154]
Okuma, Silas Oseme
Parametric Optimization (GMAW) for the improvement of Mild Steel weld strength using Response Surface Technique [Volume 11, Issue 4, 2022, Pages 390-398]
Olabanji, O. M.
Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]
Olufunto Adedotun, K.
Trend extrapolation of domestic air travel demand in Nigeria (2018-2030) [Volume 7, Issue 4, 2018, Pages 468-481]
Oluwafemi, John Damilola
Parametric Optimization (GMAW) for the improvement of Mild Steel weld strength using Response Surface Technique [Volume 11, Issue 4, 2022, Pages 390-398]
Orumgbe, Chukwuekum
Parametric Optimization (GMAW) for the improvement of Mild Steel weld strength using Response Surface Technique [Volume 11, Issue 4, 2022, Pages 390-398]
Osama, I.
Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]
Oztuzcu, G.
A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]
P
Pabarja, Ramin
Analysis of the LARG of the hospital medical equipment supply chain using the fuzzy inference system [Volume 13, Issue 2, 2024, Pages 116-151]
Pakzad, A.
Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]
Pal, S.
Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]
Pal, S.
A note on the generalized indices of process capability [Volume 9, Issue 3, 2020, Pages 286-303]
Pandey, P.
Restricting shoulder surfing: a modified graphical password Technique [Volume 8, Issue 4, 2019, Pages 394-405]
Pankratov, Evgeny L.
Influence of missmatch-induced stress and porosity of materials on technological process [Volume 11, Issue 2, 2022, Pages 92-118]
Parvaresh, Fereshteh
Application of Circular Economy for Sustainable Waste Management in the Carpet Industry [(Articles in Press)]
Parvizi, Mahdi
The study of multi-objective supplier selection problem by a novel hybrid method: COA/ε-constraint [Volume 10, Issue 3, 2021, Pages 223-237]
Pasebani, Mohammad
Identifying key indicators for developing the use of blockchain technology in financial systems [Volume 11, Issue 3, 2022, Pages 244-257]
Pichka, Kh.
Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]
Piran, F.
Data Envelopment Analysis Based on MPSS Efficient and Inefficient Frontiers [Volume 2, Issue 4, 2013, Pages 15-25]
Piri, M.
Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]
Pirmohabbati, Peyman
A numerical solution for the fractional ideal equation of thermoelectric coolers [Volume 11, Issue 3, 2022, Pages 258-272]
Pourqasem, Javad
Cloud-based IoT: integration cloud computing with internet of things [Volume 7, Issue 4, 2018, Pages 482-494]
Pradeep, N.
Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]
Pradeep, N.
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
Pradeep, N.
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Prasad, N.
Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]
Prasad, N.
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
Prasad, N.
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Prasad Rao, Y.V.S.S.S.V.
Optimization of Emergency Management System in a Construction Organization in India [Volume 1, Issue 3, 2012, Pages 26-38]
Premachandra, J. K.
Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]
Q
Qajari, Somayeh
Designing a model for creating an organization with high reliability, case study: Iran space research institute [Volume 11, Issue 1, 2022, Pages 30-49]
R
Rabbani, M.
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Rabbani, M.
A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]
Rabbani, M.
Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]
Rabbani, M.
Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]
Rabbi, Md. F.
Implementation of fuzzy rule-based algorithms in p control chart to improve the performance of statistical process control [Volume 7, Issue 4, 2018, Pages 441-459]
Rabby, Md. F.
Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study [Volume 8, Issue 2, 2019, Pages 140-157]
Rafiei, H.
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Rahgozar, A.
Extracting of Relationships Between Modern Management Techniques in SME Manufacturing Support and Procurement of Equipment for Oil Companies of Iran [Volume 6, Issue 2, 2017, Pages 106-120]
Rahimi Ghazikalayeh, A.
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]
Rahman, Md.
Ergonomic furniture design for secondary girls school in Bangladesh [Volume 8, Issue 2, 2019, Pages 187-202]
Rahman, M. S.
Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]
Rahman, S M Atikur
Productivity optimization in the electronics industry using simulation-based modeling approach [Volume 13, Issue 2, 2024, Pages 104-115]
Rahmani, Bijan
Identification and evaluation of congestion in two-stage network data envelopment analysis [Volume 12, Issue 1, 2023, Pages 53-72]
Rahpeymaii, F.
A Barzilai Borwein Adaptive Trust-Region Method for Solving Systems of Nonlinear Equation [Volume 6, Issue 4, 2017, Pages 339-349]
Raissi, S.
A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]
Rajabi, F.
Solving Fuzzy Step Fixed Charge Transportation Problems via Metaheuristics [Volume 2, Issue 3, 2013, Pages 24-34]
Rajabi, Reza
The study of multi-objective supplier selection problem by a novel hybrid method: COA/ε-constraint [Volume 10, Issue 3, 2021, Pages 223-237]
Raja Prasad, S.V.S.
Optimization of Emergency Management System in a Construction Organization in India [Volume 1, Issue 3, 2012, Pages 26-38]
Rajpal, B.
Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]
Rajpal, B.
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
Rajpal, B.
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Ranjan, K Sh.
Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]
Ranjan, K Shweta
A short communication article on contactless menu [Volume 9, Issue 4, 2020, Pages 313-317]
Ranjbar, M. J.
Fuzzy Goal Programming for Linear Facility Location-Allocation in a Supply Chain; The Case of Steel Industry [Volume 6, Issue 2, 2017, Pages 90-105]
Rao Mangalore, K. K.
Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]
Rao Mangalore, K. K.
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
Rashid, S.
An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]
Rasi Nojehdehi, Reza
Classifications of linking activities based on their inefficiencies in Network DEA [Volume 12, Issue 2, 2023, Pages 165-176]
Rasouli Pareh Yousefian, Saeed
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Razavi, S. M.
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
Razavian, Shabnam
A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]
Razmi, J.
Identifying Buyer-Supplier Conflict in Collaborative Process New Product Development [Volume 3, Issue 2, 2014, Pages 12-23]
Refahi, Amir Hossein
Data mining and diagnosis of heart diseases: a hybrid approach to the b-mine algorithm and association rules [Volume 11, Issue 1, 2022, Pages 77-91]
Refahi Sheikhani, Amir Hossein
A numerical solution for the fractional ideal equation of thermoelectric coolers [Volume 11, Issue 3, 2022, Pages 258-272]
Rembulan, Glisina Dwinoor
Improving the performance of planning and controlling raw material inventory in food industry [Volume 10, Issue 4, 2021, Pages 332-345]
Rezaee Jordehi, Ahmad
Leveraging deep feature learning for handwriting biometric authentication [Volume 13, Issue 1, 2024, Pages 88-103]
Rezaeian, J.
Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]
Rezapour, Abdoreza
Leveraging deep feature learning for handwriting biometric authentication [Volume 13, Issue 1, 2024, Pages 88-103]
Rezapour Niari, M.
Multi-objective sequence dependent setup times hybrid flowshop scheduling: A literature review [Volume 7, Issue 3, 2018, Pages 254-306]
Ripon, B.M. Atiur Rahman
Optimization of a green supply chain network: a case study in a pharmaceutical industry [Volume 10, Issue 3, 2021, Pages 174-186]
R. Mangalore, K. K.
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Roshan Milani, Afshin
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Rostami-Malkhalifeh, M.
Data Envelopment Analysis Based on MPSS Efficient and Inefficient Frontiers [Volume 2, Issue 4, 2013, Pages 15-25]
Rostamy mal khalifeh, M.
A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]
Rostamy-Malkhalifeh, Mohsen
Identification and evaluation of congestion in two-stage network data envelopment analysis [Volume 12, Issue 1, 2023, Pages 53-72]
Rousta, Alireza
Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [Volume 10, Issue 3, 2021, Pages 187-205]
Rumi, K. M. Jalal Uddin
Selecting methodology for developing emergency preparedness and response framework of an NPP accident [Volume 11, Issue 1, 2022, Pages 1-8]
S
Saberi Najafi, H.
Non-Standard Finite Difference Schemes for Solving Singular Lane-Emden Equation [Volume 6, Issue 2, 2017, Pages 161-171]
Sadeghi, Mohammad Ebrahim
Application of accelerated life testing in human reliability analysis [Volume 10, Issue 4, 2021, Pages 346-357]
Sadi-Nezhad, S.
Competition in Supply Chain Network: Retailers’ Risk Averseness Approach [Volume 6, Issue 2, 2017, Pages 121-128]
Safari, H.
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
Saffari, Hamid
A new model for balancing between asset sharing risk and responsiveness: developing the augmented ɛ-constraint method [Volume 12, Issue 2, 2023, Pages 106-128]
Saha, Pronab Krishna
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Saha, S.
A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]
Sahihi Oskooyi, S.M.
Comprehensive Method to Determine Real Option Utilizing Probability Distribution [Volume 3, Issue 1, 2014, Pages 11-25]
Sajadi, Seyed Mojtaba
Entrepreneurial team characteristics, social interactions, and the success of information technology start-ups [Volume 11, Issue 3, 2022, Pages 224-243]
Sajana, Sh.
Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]
Sakib, N.
Application of line balancing heuristics for achieving an effective layout: a case study. [Volume 9, Issue 2, 2020, Pages 114-129]
Salah, H.
Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]
Salami, Farzaneh
How metaheuristic algorithms can help in feature selection for Alzheimer’s diagnosis [Volume 12, Issue 2, 2023, Pages 197-204]
Salehi, A.
Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]
Salehi, N.
Optimum solar and wind model with particle optimization (PSO) [Volume 7, Issue 4, 2018, Pages 460-467]
Salimifard, Khodakaram
Analysis of the LARG of the hospital medical equipment supply chain using the fuzzy inference system [Volume 13, Issue 2, 2024, Pages 116-151]
Salnazaryan, A.
Economical Evaluation of Subsidy Omitting Effect on the Renewable Energy Position in Power Generation in Iran [Volume 2, Issue 2, 2013, Pages 17-34]
Sanei, Masud
A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]
Sankad, G. C.
Influence of Wall Properties on the Peristaltic Flow of a Jeffrey Fluid in a Uniform Porous Channel under Heat Transfer [Volume 6, Issue 3, 2017, Pages 246-261]
Sarfaraj, N. MD.
Applying flexible job shop scheduling in patients management to optimize processing time in hospitals. [Volume 10, Issue 1, 2021, Pages 46-55]
Sattarkhan, Mohammad Hossein
Production Scheduling of Parallel Identical Lines in a Multi-Product Manufacturing System with Genetic Algorithm [Volume 12, Issue 1, 2023, Pages 7-20]
Sayadi, M.
Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]
Sebt, M. V.
Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]
Seiti, H. R.
Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]
Selim, K. A.
Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]
Sen Gupta, H.
Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]
Seyedalikhani, Fatemehsadat
Entrepreneurial team characteristics, social interactions, and the success of information technology start-ups [Volume 11, Issue 3, 2022, Pages 224-243]
Seyedrezaei, M.
Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]
Shadkam, E.
Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]
Shadkam, Elham
The study of multi-objective supplier selection problem by a novel hybrid method: COA/ε-constraint [Volume 10, Issue 3, 2021, Pages 223-237]
Shadrokh, Sh.
A simulated annealing optimization algorithm for equal and un-equal area construction site layout problem [Volume 8, Issue 2, 2019, Pages 89-104]
Shafaee, Soheil
Assessing the location of relief centers using a combination of multi-criteria decision-making methods and gis (case study: district 18 of tehran) [Volume 11, Issue 1, 2022, Pages 16-29]
Shafiei, M.
Comprehensive Method to Determine Real Option Utilizing Probability Distribution [Volume 3, Issue 1, 2014, Pages 11-25]
Shafiei Nikabadi, M.
The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]
Shaghaghi Shahri, V.
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
Shahnazari-Shahrezaei, Parisa
Designing the multivariate nonconforming proportion control charts considering the measurement error [Volume 10, Issue 4, 2021, Pages 295-306]
Shahparvari, Sh.
A Novel Discrete Electromagnetism-Like for Fuzzy Open Shop Scheduling Problem with Parallel Machines to Minimize Makespan [Volume 1, Issue 3, 2012, Pages 1-25]
Shahsavari pour, N.
A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]
Shahsavari Pour, N.
Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]
Shahsavari Pour, N.
A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]
Shamrat, Bm Adnan Rahman
Performance Prediction of Green Supply Chain Using Bayesian Belief Network: Case Study of a Textile Industry [Volume 11, Issue 4, 2022, Pages 327-348]
Shams, A. T.
Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study [Volume 8, Issue 2, 2019, Pages 140-157]
Shams, A. T.
Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]
Shams, A. T.
Application of line balancing heuristics for achieving an effective layout: a case study. [Volume 9, Issue 2, 2020, Pages 114-129]
Shamsi, A.
Solving FMS Assignment Problem with Grouping Genetic Algorithm [Volume 1, Issue 3, 2012, Pages 60-68]
Shariffar, Farhad
A numerical solution for the fractional ideal equation of thermoelectric coolers [Volume 11, Issue 3, 2022, Pages 258-272]
Sharma, A.
Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]
Shastri, R.
Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]
Shastri, R.
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
Shastri, R.
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Shefa, J.
Implementation of fuzzy rule-based algorithms in p control chart to improve the performance of statistical process control [Volume 7, Issue 4, 2018, Pages 441-459]
Sheikhi, H.
A Novel Approach for Solving Fuzzy Multi-Objective Zero-One Linear Programming Problems [Volume 1, Issue 1, 2012, Pages 42-63]
Sheikhi, H.
A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]
Shetty, P.
Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]
Sheykhan, A.
Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]
Sheykhan, Abbas
Using a new algorithm to improve the search answer in quadratic assignment problem (QAP) [Volume 10, Issue 2, 2021, Pages 165-173]
Shirouyehzad, H.
Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]
Shirouyehzad, H.
A Multi-Objective Model for Location-Allocation Problem in a Supply Chain [Volume 4, 1(4), 2015, Pages 24-42]
Shojaie, Amir Abbas
Development a forward-reverse network optimization model with delay reduction and multistage fuzzy demand satisfaction policy [Volume 12, Issue 4, 2023, Pages 375-387]
Shokri, Soheil
Data mining and diagnosis of heart diseases: a hybrid approach to the b-mine algorithm and association rules [Volume 11, Issue 1, 2022, Pages 77-91]
Shokri Cheshmeh Sabzi, Azam
Ranking of companies in generating operating cash flows based on data envelopment analysis [Volume 12, Issue 4, 2023, Pages 364-374]
Singh, A.
Movie recommendation system using machine learning [Volume 9, Issue 1, 2020, Pages 84-98]
Singh, A.
Comparative analysis on YOLO object detection with OpenCV [Volume 9, Issue 1, 2020, Pages 46-64]
Singh, A.
Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]
Singh, A.
Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]
Singh, B.
Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]
Singh, B.
A short communication article on contactless menu [Volume 9, Issue 4, 2020, Pages 313-317]
Singh, R.K.
Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]
Singh Sidhu, B.
The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]
Sinha, A. K.
Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]
Sogandi, Fatemeh
A Genetic Algorithm for Curve Fitting by Spline Regression [Volume 11, Issue 4, 2022, Pages 399-410]
Soleimaninia, Fatemeh
A vibration damping optimization algorithm to solve flexible job shop scheduling problems with reverse flows [Volume 12, Issue 4, 2023, Pages 431-449]
Soleymanfar, V. R.
Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]
Soltanpour, Ali
Improving classic hungarian algorithm considering uncertainty by applying for grey numbers [Volume 12, Issue 3, 2023, Pages 321-336]
Soolaki, M.
Contractor Selection Using Fuzzy Hybrid AHP-VIKOR [Volume 2, Issue 4, 2013, Pages 26-40]
Srivastava, S.C.
Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]
Ssempijja, Maureen Nalubowa
Modelling and optimization of residential electricity load under stochastic demand [Volume 13, Issue 1, 2024, Pages 48-61]
Stephens, M. S.
Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]
Supriyati, Supriyati
Measurement of service quality and customer satisfaction in the SME industry: literature study [Volume 12, Issue 2, 2023, Pages 129-142]
Szmelter-Jarosz, A.
A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]
T
Taeb, Z.
Determine the Efficiency of Time Depended Units by Using Data Envelopment Analysis [Volume 6, Issue 3, 2017, Pages 193-201]
Taghi-Nezhad, N. A.
Calculation of fuzzy matrices determinant [Volume 8, Issue 3, 2019, Pages 254-261]
Taghipouriyan Gilani, Mohammad Javad
Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [Volume 10, Issue 3, 2021, Pages 206-222]
Taghizadeh, K.
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
Tahasin, Tasnim Ahmed
Analyzing the Impact of 5S implementation in the manufacturing department: a case study [Volume 10, Issue 4, 2021, Pages 286-294]
Taifa, I. W.
Assessing the awareness of local consumer’s product producers towards packaging standards in Tanzania [Volume 8, Issue 1, 2019, Pages 40-52]
Taifa, I. W.
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Taji, M.
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]
Tarokh, M.J.
Customer Involvement in Innovation Process Based on Open Innovation Concepts [Volume 1, Issue 2, 2012, Pages 1-9]
Tarokh, M.J.
Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]
Tarokh, M.J.
Closed-Loop Supply Chain Network with Green Supplier Selection and Disassembly of Products: A Bi-Objective Model [Volume 2, Issue 4, 2013, Pages 58-71]
Tarokh, M.J.
Applying the Process Mining Project Methodology for Insurance Risks Reduction [Volume 3, Issue 4, 2014, Pages 57-69]
Tarokh, M.J.
Classification and Comparison of the Hybrid Collaborative Filtering Systems [Volume 6, Issue 2, 2017, Pages 129-148]
Taşkan, Buşra
Development of the field of organizational performance during the industry 4.0 period [Volume 11, Issue 2, 2022, Pages 134-154]
Tasnim, Fowzia
COVID-19 and food supply chain disruptions in Bangladesh: impacts and strategies [Volume 11, Issue 2, 2022, Pages 155-164]
Tasnim, Fowzia
Performance Prediction of Green Supply Chain Using Bayesian Belief Network: Case Study of a Textile Industry [Volume 11, Issue 4, 2022, Pages 327-348]
Tavakkoli-Moghaddam, R.
Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]
Tavakkoli-Moghaddam, R.
Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]
Tavakkoli-Moghaddam, R.
A Multi-Objective Model for Location-Allocation Problem in a Supply Chain [Volume 4, 1(4), 2015, Pages 24-42]
Tavakkoli-Moghaddam, R.
Solving a Bi-Objective Transportation Vehicle Routing Problem for Waste Collection by a New Hybrid Algorithm [Volume 5, 1(4), 2016, Pages 16-42]
Tavakkoli-Moghaddam, R.
Dynamic Pricing Decisions for Substitutable Products [Volume 6, Issue 2, 2017, Pages 149-160]
Tavakkoli-Moghaddam, R.
A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]
Tavakkoli-Moghaddam, Reza
How metaheuristic algorithms can help in feature selection for Alzheimer’s diagnosis [Volume 12, Issue 2, 2023, Pages 197-204]
Tavakoli, M. M.
Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]
Tekletsadik, Seife Ebeyedengel
Overall productivity assessment using the performance objectives productivity (po-p) approach: a case study [Volume 11, Issue 3, 2022, Pages 214-223]
Tekletsadik, Seife Ebeyedengel
Productivity Improvement through Ergonomics Sub-system Concern Using MCDM with Goal Programing: A Case Study [Volume 11, Issue 4, 2022, Pages 378-389]
Teymouri, Aminullah
Designing a model for creating an organization with high reliability, case study: Iran space research institute [Volume 11, Issue 1, 2022, Pages 30-49]
Teymournejad, E.
Simulation in Citizen Relationship Management [Volume 1, Issue 3, 2012, Pages 48-59]
Tiwari, S.K.
Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]
Tohidi, Gasem
A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]
Tohidi, Ghasem
A mathematical model for robust landing and take-off scheduling at an airport considering runway disturbances [Volume 12, Issue 1, 2023, Pages 21-42]
Tohidi, Hamid
Identifying and ranking the effective financial factors on rural entrepreneurial small businesses [Volume 13, Issue 1, 2024, Pages 1-10]
Tohidi Nasab, Parviz
A mathematical model for robust landing and take-off scheduling at an airport considering runway disturbances [Volume 12, Issue 1, 2023, Pages 21-42]
Torkian, Vajiheh
Development a forward-reverse network optimization model with delay reduction and multistage fuzzy demand satisfaction policy [Volume 12, Issue 4, 2023, Pages 375-387]
Tuli, Noshin Tasnim
Analyzing the Impact of 5S implementation in the manufacturing department: a case study [Volume 10, Issue 4, 2021, Pages 286-294]
Tunali, S.
A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]
U
Udofia, Ekpenyong Akanimo
Design and Development of a Wind Turbine with Flanged Diffuser Operating in Low Wind Speed Regime [Volume 11, Issue 4, 2022, Pages 366-377]
Udofia, Ekpenyong Akanimo
Thermodynamic analysis of hybrid-nanofluids-zeotropic mixtures in a vapour compression refrigeration system (VCRS) based on exergy principles [Volume 12, Issue 2, 2023, Pages 143-154]
Udoh, Victor Etok
Design and Development of a Wind Turbine with Flanged Diffuser Operating in Low Wind Speed Regime [Volume 11, Issue 4, 2022, Pages 366-377]
Udoka, Ch. G.
The impact of passenger's traffic on exchange rate and economic growth in Nigerian aviation industry [Volume 9, Issue 4, 2020, Pages 364-378]
V
Vaez Ghasemi, Mohsen
A mathematical model for robust landing and take-off scheduling at an airport considering runway disturbances [Volume 12, Issue 1, 2023, Pages 21-42]
Vaez-Ghasemi, Mohsen
Presentation a Multi-objective Optimization Model for Resource-Constrained Project Scheduling Regarding Financial Costs, Time Delays and the Reliability Function [(Articles in Press)]
Vahedi-Nouri, B.
A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]
Valmohammadi, Changiz
The impact of digital transformation on sustainability: a case of the Iranian telecom industry [Volume 12, Issue 3, 2023, Pages 306-320]
Verma, S. V. K.
Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]
Vindo Kumar, G.
Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]
V M S S Kiran Kumar, R.
Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]
V. M. S. S. Kiran Kumar, R.
Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]
W
Wang, Fengqiong
Some results on (c)-mapping [Volume 10, Issue 3, 2021, Pages 276-285]
Weng, Sh.
Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]
Weng, S. Q.
Some fixed point results involving a general LW-type cyclic mapping in complete b-metric-like spaces [Volume 8, Issue 3, 2019, Pages 262-273]
Wiyatno, Tri Ngudi
Measurement of service quality and customer satisfaction in the SME industry: literature study [Volume 12, Issue 2, 2023, Pages 129-142]
Wu, D. P.
Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]
X
Xames, Doulotuzzaman
COVID-19 and food supply chain disruptions in Bangladesh: impacts and strategies [Volume 11, Issue 2, 2022, Pages 155-164]
Xames, Md Doulotuzzaman
Performance Prediction of Green Supply Chain Using Bayesian Belief Network: Case Study of a Textile Industry [Volume 11, Issue 4, 2022, Pages 327-348]
Y
Yaghoobi, M. A.
A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]
Yaghoubi, A.
Non-Standard Finite Difference Schemes for Solving Singular Lane-Emden Equation [Volume 6, Issue 2, 2017, Pages 161-171]
Yousefnejad, H.
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Yücedag Gürel, Asiye
Development of a lean maturity assessment model using interval-valued spherical fuzzy AHP method [Volume 13, Issue 1, 2024, Pages 25-47]
Z
Zabihi, F.
A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]
Zahan, N.
Improvement of the student-teacher learning interface with selecting and designing a teaching method [Volume 9, Issue 3, 2020, Pages 247-259]
Zahan, N.
Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]
Zahan, N.
Applying flexible job shop scheduling in patients management to optimize processing time in hospitals. [Volume 10, Issue 1, 2021, Pages 46-55]
Zahedi, Mirreza
Modeling of the supply chain of cooperative game between two tiers of retailer and manufacturer under conditions of uncertainty [Volume 10, Issue 2, 2021, Pages 95-116]
Zahiri, B.
A Robust Stochastic Programming Approach for Blood Collection and Distribution Network Design [Volume 3, Issue 2, 2014, Pages 1-11]
Zaman, Mobasshira
Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis [Volume 10, Issue 2, 2021, Pages 117-127]
Zaman, Mobasshira
Evaluation of household expenditure in the united states: pre-covid and post-covid statistical analysis [Volume 12, Issue 4, 2023, Pages 388-396]
Zamani, S.
Contractor Selection Using Fuzzy Hybrid AHP-VIKOR [Volume 2, Issue 4, 2013, Pages 26-40]
Zamzam, Fatemeh
An Interval Type-2 Fuzzy AHP Approach for Success Factors of Green Supply Chain Management [(Articles in Press)]
Zandhessami, H.
The Impact of Total Quality Management on Organizational Innovation [Volume 2, Issue 1, 2013, Pages 1-11]
Zandhessami, H.
Extracting of Relationships Between Modern Management Techniques in SME Manufacturing Support and Procurement of Equipment for Oil Companies of Iran [Volume 6, Issue 2, 2017, Pages 106-120]
Zandhessami, Hessam
Identifying effective factors of organizational resilience: a meta-synthesis study [Volume 12, Issue 2, 2023, Pages 177-196]
Zandieh, M.
Competition in Supply Chain Network: Retailers’ Risk Averseness Approach [Volume 6, Issue 2, 2017, Pages 121-128]
Zhang, Y.
Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]
Zhilakzadeh Dezfouli, R.
Study the Impact of Customer's Profile and Participation on the Performance of Customer Relationship Management in Service Organizations [Volume 1, Issue 1, 2012, Pages 29-41]
Ziaeifar, A.
Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]