A

  • ABC classification Improving the Performance of Planning and Controlling Raw Material Inventory in Food Industry [(Articles in Press)]

  • Abel integral equations CAS Wavelet Function Method for Solving Abel Equations with Error Analysis [Volume 6, Issue 4, 2017, Pages 350-364]

  • ACCOUNTING ACTION Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [(Articles in Press)]

  • Acridoidea stirred Artificial Bee Colony Algorithm Real power loss reduction by Acridoidea stirred artificial bee colony algorithm [Volume 9, Issue 3, 2020, Pages 209-215]

  • Additive Manufacturing Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]

  • Additive Manufacturing Fabrication and Process Parameter Optimization of A 3D Printer Using Response Surface Methodology [(Articles in Press)]

  • Adsorption Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]

  • Aerial Industries Optimal Design of PM Synchronous Generator for Aerial Industries Power Supply Using Cuckoo Algorithm [Volume 3, Issue 3, 2014, Pages 49-68]

  • Aggregate Production Planning An optimization model for aggregate production planning and control: a genetic algorithm approach [Volume 8, Issue 3, 2019, Pages 203-224]

  • AHP A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]

  • AHP An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]

  • AHP Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]

  • AHP Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]

  • AHP Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [(Articles in Press)]

  • Airport Concessioning a Strategy for Enhancing Nigeria’s Airport Operational Efficiency - Lessons from Developed Countries [Volume 6, Issue 3, 2017, Pages 228-245]

  • Amplified Black Hole Amplified black hole algorithm for real power loss reduction [Volume 9, Issue 2, 2020, Pages 130-142]

  • Analytical Hierarchy Process A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]

  • Analytical network process Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]

  • Analytic Hierarchy Process Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]

  • Analytic Hierarchy Process Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]

  • Analytic Hierarchy Process Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]

  • Analytic Hierarchy Process Developing 360 degree performance evaluation method for school teachers [Volume 8, Issue 1, 2019, Pages 28-39]

  • Analytic Hierarchy Process (AHP) Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]

  • Analytic Network Process Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]

  • Anthropometry Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]

  • Anthropometry Ergonomic furniture design for secondary girls school in Bangladesh [Volume 8, Issue 2, 2019, Pages 187-202]

  • Aras Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]

  • Arithmetic operations Calculation of fuzzy matrices determinant [Volume 8, Issue 3, 2019, Pages 254-261]

  • ASEAN University Network Quality Assurance Supply Chain Management Information System Model for quality assurance in educational management for ASEAN University Network Quality Assurance (AUN-QA) [(Articles in Press)]

  • Astrophysics Non-Standard Finite Difference Schemes for Solving Singular Lane-Emden Equation [Volume 6, Issue 2, 2017, Pages 161-171]

  • Augmented Monkey Optimization Algorithm Factual power loss reduction by augmented monkey optimization algorithm [Volume 9, Issue 1, 2020, Pages 1-12]

  • Authentication Restricting shoulder surfing: a modified graphical password Technique [Volume 8, Issue 4, 2019, Pages 394-405]

  • Average Run Length Designing the Multivariate Nonconforming Proportion Control Charts Considering the Measurement Error [(Articles in Press)]

  • Aviation industry The impact of passenger's traffic on exchange rate and economic growth in Nigerian aviation industry [Volume 9, Issue 4, 2020, Pages 364-378]

B

  • Balanced Scorecard A New Method to Organizational Ranking: Integrating BSC and DEA [Volume 1, Issue 3, 2012, Pages 39-47]

  • Bangladesh Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]

  • Bi-level programming An Interdiction Median Model for Hierarchical Capacitated Facilities [Volume 3, Issue 1, 2014, Pages 1-10]

  • Bi-objective Optimization Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]

  • Biomedical implants Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]

  • B-metric-like space Some fixed point results involving a general LW-type cyclic mapping in complete b-metric-like spaces [Volume 8, Issue 3, 2019, Pages 262-273]

  • B-Metric-Like Space (BMLS) Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]

  • Branch and bound Using a new algorithm to improve the search answer in quadratic assignment problem (QAP) [Volume 10, Issue 2, 2021, Pages 165-173]

  • Business Cycle Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]

  • Business Process Collaborative Information System for Managing the Supply Chain: Architecture Based on a Multi Agent System [Volume 2, Issue 2, 2013, Pages 1-16]

C

  • Calibration Solving Monetary (MIU) models with Linearized Euler Equations: Method of Undetermined Coefficients [Volume 6, Issue 2, 2017, Pages 172-183]

  • Capacity Concessioning a Strategy for Enhancing Nigeria’s Airport Operational Efficiency - Lessons from Developed Countries [Volume 6, Issue 3, 2017, Pages 228-245]

  • Capillary Marketing Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]

  • Carbon Fiber Reinforced Plastic (CFRP) Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]

  • CAS wavelet CAS Wavelet Function Method for Solving Abel Equations with Error Analysis [Volume 6, Issue 4, 2017, Pages 350-364]

  • Cause and effect diagram Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study [Volume 8, Issue 2, 2019, Pages 140-157]

  • Cayley graph Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]

  • CCD Formulation of a customer-oriented product and determination of optimum design parameters using response surface methodology [Volume 9, Issue 4, 2020, Pages 349-363]

  • Change point A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]

  • Churn prediction A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]

  • Citizen Relationship Management Simulation in Citizen Relationship Management [Volume 1, Issue 3, 2012, Pages 48-59]

  • Clay Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]

  • Closed-loop supply chain Carbon Based Closed-Loop Supply Chain Design under Uncertainty using an Interval-Valued Fuzzy Stochastic Programming Approach [Volume 3, Issue 3, 2014, Pages 24-48]

  • Cloud manufacturing Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]

  • CNC PCB Plotter Formulation of a customer-oriented product and determination of optimum design parameters using response surface methodology [Volume 9, Issue 4, 2020, Pages 349-363]

  • CO2 emission Optimization of a Green Supply Chain Network: A Case Study in a Pharmaceutical Industry. [(Articles in Press)]

  • COCO Comparative analysis on YOLO object detection with OpenCV [Volume 9, Issue 1, 2020, Pages 46-64]

  • Coincident Indicators Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]

  • Coinfection Optimal Control strategy on the transmission dynamics of Human Papillomavirus (HPV) and Human Immunodeficiency Viruses (HIV) coinfection [(Articles in Press)]

  • Combined QFDVA The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]

  • Common set of weights Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]

  • Competitiveness Implementation of Six Sigma DMAIC methodology for increasing the competitiveness of SMEs in Ethiopia [Volume 10, Issue 1, 2021, Pages 1-8]

  • Complex system A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]

  • Composite Leading Indicator Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]

  • Composites Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]

  • Compressive and tensile strength of concrete Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]

  • Computer Algorithms Using a new algorithm to improve the search answer in quadratic assignment problem (QAP) [Volume 10, Issue 2, 2021, Pages 165-173]

  • Conditional value at risk Competition in Supply Chain Network: Retailers’ Risk Averseness Approach [Volume 6, Issue 2, 2017, Pages 121-128]

  • Congruent Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]

  • Constrained project scheduling A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]

  • Constraint satisfaction model Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]

  • Construction projects Integrated model of critical success factors of construction projects: A case of Esfahan [Volume 7, Issue 3, 2018, Pages 381-395]

  • Construction site layout planning A simulated annealing optimization algorithm for equal and un-equal area construction site layout problem [Volume 8, Issue 2, 2019, Pages 89-104]

  • Content based recommendation Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]

  • Contour Improvement in video inpainting in presence of moving subjects [Volume 8, Issue 4, 2019, Pages 325-338]

  • Contract Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]

  • Contractor selection Contractor Selection Using Fuzzy Hybrid AHP-VIKOR [Volume 2, Issue 4, 2013, Pages 26-40]

  • COPRAS Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]

  • COPRAS Evaluation of Iranian automotive industries [Volume 8, Issue 2, 2019, Pages 115-139]

  • COPRAS Selecting the optimal industrial investment by multi-criteria decision-making methods with emphasis on, TOPSIS, VIKOR, and COPRAS (case study of Guilan province) [Volume 8, Issue 4, 2019, Pages 312-324]

  • Copy centre Application of total productive maintenance in service organization [Volume 8, Issue 2, 2019, Pages 176-186]

  • Corrosive properties Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]

  • Cost Optimization of a Green Supply Chain Network: A Case Study in a Pharmaceutical Industry. [(Articles in Press)]

  • Cost analysis Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]

  • Critical Success Factors (CSF) Integrated model of critical success factors of construction projects: A case of Esfahan [Volume 7, Issue 3, 2018, Pages 381-395]

  • CRM activities Customer Involvement in Innovation Process Based on Open Innovation Concepts [Volume 1, Issue 2, 2012, Pages 1-9]

  • Crude oils Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]

  • Cuckoo Algorithm Optimal Design of PM Synchronous Generator for Aerial Industries Power Supply Using Cuckoo Algorithm [Volume 3, Issue 3, 2014, Pages 49-68]

  • Cuckoo Optimization Algorithm (COA) The study of multi-objective supplier selection problem by a novel hybrid method: COA/ε-Constraint [(Articles in Press)]

  • Cultural algorithm Solving a Bi-Objective Transportation Vehicle Routing Problem for Waste Collection by a New Hybrid Algorithm [Volume 5, 1(4), 2016, Pages 16-42]

  • Customer Lifetime Value Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]

  • Customer Lifetime Value Customer segmentation to identify key customers based on RFM model by using data mining techniques [(Articles in Press)]

  • Customer Order Decoupling Point Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]

  • Customer-oriented product Formulation of a customer-oriented product and determination of optimum design parameters using response surface methodology [Volume 9, Issue 4, 2020, Pages 349-363]

  • Customer Participation Study the Impact of Customer's Profile and Participation on the Performance of Customer Relationship Management in Service Organizations [Volume 1, Issue 1, 2012, Pages 29-41]

  • Customer Profile Study the Impact of Customer's Profile and Participation on the Performance of Customer Relationship Management in Service Organizations [Volume 1, Issue 1, 2012, Pages 29-41]

  • Customer Relationship Management Study the Impact of Customer's Profile and Participation on the Performance of Customer Relationship Management in Service Organizations [Volume 1, Issue 1, 2012, Pages 29-41]

  • Customer Relationship Management Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]

  • Customer Relationship Management Customer segmentation to identify key customers based on RFM model by using data mining techniques [(Articles in Press)]

  • Customer’ s satisfaction Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]

  • CUSUM charts A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]

  • Cycle Time The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]

  • Cycle Time Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]

D

  • Data Envelopment Analysis A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]

  • Data Envelopment Analysis Efficiency Evaluation and Ranking of the Research Center at the Ministry of Energy: A Data Envelopment Analysis Approach [Volume 1, Issue 1, 2012, Pages 10-18]

  • Data Envelopment Analysis Performance Evaluation Function for Benchmarking Process Using Context-Dependent Data Envelopment Analysis [Volume 1, Issue 1, 2012, Pages 19-28]

  • Data Envelopment Analysis Data Envelopment Analysis Based on MPSS Efficient and Inefficient Frontiers [Volume 2, Issue 4, 2013, Pages 15-25]

  • Data Envelopment Analysis Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]

  • Data Envelopment Analysis Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]

  • Data Envelopment Analysis Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]

  • Data Envelopment Analysis Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]

  • Data Envelopment Analysis Determine the Efficiency of Time Depended Units by Using Data Envelopment Analysis [Volume 6, Issue 3, 2017, Pages 193-201]

  • Data Envelopment Analysis Assess the efficiency and effectiveness simultaneously in a three-stage process, by using a unified model [Volume 4, 1(4), 2015, Pages 15-23]

  • Data Envelopment Analysis The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]

  • Data Envelopment Analysis A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]

  • Data Envelopment Analysis Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]

  • Data Envelopment Analysis Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]

  • Data Envelopment Analysis The survey of data envelopment analysis models in fuzzy stochastic environments [Volume 8, Issue 4, 2019, Pages 366-383]

  • Data Envelopment Analysis Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]

  • Data Envelopment Analysis A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]

  • Data Envelopment Analysis (DEA) A New Bargaining Game Model for Measuring Performance of Two-Stage Network Structures [Volume 1, Issue 2, 2012, Pages 27-39]

  • Data mining Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]

  • Data mining A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]

  • DEA Performance Evaluation Function for Benchmarking Process Using Context-Dependent Data Envelopment Analysis [Volume 1, Issue 1, 2012, Pages 19-28]

  • DEA A New Method to Organizational Ranking: Integrating BSC and DEA [Volume 1, Issue 3, 2012, Pages 39-47]

  • DEA Integrated and periodic relief logistics planning for reaction phase in uncertainty condition and model solving by PSO algorithm [Volume 8, Issue 4, 2019, Pages 294-311]

  • Decay Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]

  • Decision Making Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]

  • Decision Making A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 7, Issue 4, 2018, Pages 423-440]

  • Decision Making A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 8, Issue 3, 2019, Pages 225-242]

  • Decision Making Unit The survey of data envelopment analysis models in fuzzy stochastic environments [Volume 8, Issue 4, 2019, Pages 366-383]

  • Decision making unit (DMU) A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]

  • Decision-making Units A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]

  • Decision Making Units Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]

  • Decision Tree Classifier Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]

  • Deep Neural Networks (DNN) Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]

  • Delivery Option Public - Private Partnership Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]

  • DEMATEL method The Impact of Total Quality Management on Organizational Innovation [Volume 2, Issue 1, 2013, Pages 1-11]

  • Design for functionality Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]

  • Design for Reconfigurability Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]

  • Design for X Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]

  • Difference divisor graph Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]

  • Dimatel Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [(Articles in Press)]

  • Discrete electromagnetism-like algorithm A Novel Discrete Electromagnetism-Like for Fuzzy Open Shop Scheduling Problem with Parallel Machines to Minimize Makespan [Volume 1, Issue 3, 2012, Pages 1-25]

  • Distribution An optimization model for cold chain food distribution [Volume 8, Issue 3, 2019, Pages 243-253]

  • Divisor graph Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]

  • DMAIC Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]

  • DMAIC Methodology Implementation of Six Sigma DMAIC methodology for increasing the competitiveness of SMEs in Ethiopia [Volume 10, Issue 1, 2021, Pages 1-8]

  • DMU Performance Evaluation Function for Benchmarking Process Using Context-Dependent Data Envelopment Analysis [Volume 1, Issue 1, 2012, Pages 19-28]

  • Domestic Air Passenger Demand Trend extrapolation of domestic air travel demand in Nigeria (2018-2030) [Volume 7, Issue 4, 2018, Pages 468-481]

  • DSA Method Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]

  • DSGE Model Solving Monetary (MIU) models with Linearized Euler Equations: Method of Undetermined Coefficients [Volume 6, Issue 2, 2017, Pages 172-183]

  • Due Date A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]

  • Duplicate genetic algorithm Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]

E

  • Economic Growth The impact of passenger's traffic on exchange rate and economic growth in Nigerian aviation industry [Volume 9, Issue 4, 2020, Pages 364-378]

  • Educational management in supply chain Information system model for educational management in supply chain for Thai higher education institutions [Volume 10, Issue 2, 2021, Pages 87-94]

  • Effective Factors Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [(Articles in Press)]

  • Effects analysis Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]

  • Efficiency Efficiency Evaluation and Ranking of the Research Center at the Ministry of Energy: A Data Envelopment Analysis Approach [Volume 1, Issue 1, 2012, Pages 10-18]

  • Efficiency Determine the Efficiency of Time Depended Units by Using Data Envelopment Analysis [Volume 6, Issue 3, 2017, Pages 193-201]

  • Efficiency Assess the efficiency and effectiveness simultaneously in a three-stage process, by using a unified model [Volume 4, 1(4), 2015, Pages 15-23]

  • Efficiency The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]

  • Efficiency Concessioning a Strategy for Enhancing Nigeria’s Airport Operational Efficiency - Lessons from Developed Countries [Volume 6, Issue 3, 2017, Pages 228-245]

  • Efficiency Evaluation of the efficiency by DEA a case study of hospital [Volume 8, Issue 3, 2019, Pages 283-293]

  • Efficiency index Data Envelopment Analysis Based on MPSS Efficient and Inefficient Frontiers [Volume 2, Issue 4, 2013, Pages 15-25]

  • EFQM A Method for Evaluating Project Management Standards, Based on EFQM Criteria, Using FTOPSIS Method [Volume 3, Issue 3, 2014, Pages 1-12]

  • Electroflotation Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]

  • Emergency Optimization of Emergency Management System in a Construction Organization in India [Volume 1, Issue 3, 2012, Pages 26-38]

  • Emission-constraint model Carbon Based Closed-Loop Supply Chain Design under Uncertainty using an Interval-Valued Fuzzy Stochastic Programming Approach [Volume 3, Issue 3, 2014, Pages 24-48]

  • Energy Economics Optimum solar and wind model with particle optimization (PSO) [Volume 7, Issue 4, 2018, Pages 460-467]

  • Enterprise Resource Planning (ERP) selection An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]

  • Enterprise Resource Planning selection A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]

  • Environment related factors Integrated model of critical success factors of construction projects: A case of Esfahan [Volume 7, Issue 3, 2018, Pages 381-395]

  • Equipment Selection Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]

  • Ergonomics Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]

  • Ergonomics Ergonomic furniture design for secondary girls school in Bangladesh [Volume 8, Issue 2, 2019, Pages 187-202]

  • Error analysis CAS Wavelet Function Method for Solving Abel Equations with Error Analysis [Volume 6, Issue 4, 2017, Pages 350-364]

  • Excel Solver Determination of Optimum Smoothing Constant of Single Exponential Smoothing Method: A Case Study [Volume 6, Issue 3, 2017, Pages 184-192]

  • Excel VBA Implementation of fuzzy rule-based algorithms in p control chart to improve the performance of statistical process control [Volume 7, Issue 4, 2018, Pages 441-459]

  • Exchange rate The impact of passenger's traffic on exchange rate and economic growth in Nigerian aviation industry [Volume 9, Issue 4, 2020, Pages 364-378]

  • Execution system Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]

  • Extended Topsis Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]

  • Extent fuzzy analytic hierarchy process (EFAHP) Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]

F

  • Face Detection Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]

  • Face recognition Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]

  • Facial Recognition Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]

  • Facility Layout Problem(FLP) Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]

  • Facility location A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]

  • Facility location Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]

  • Facility location Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]

  • Facility location-allocation Fuzzy Goal Programming for Linear Facility Location-Allocation in a Supply Chain; The Case of Steel Industry [Volume 6, Issue 2, 2017, Pages 90-105]

  • FAHP Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]

  • FAHP A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 7, Issue 4, 2018, Pages 423-440]

  • FAHP A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 8, Issue 3, 2019, Pages 225-242]

  • Failure mode and effect analysis (FMEA) Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]

  • Faster-RCNN Comparative analysis on YOLO object detection with OpenCV [Volume 9, Issue 1, 2020, Pages 46-64]

  • Fault Tree Analysis (FTA) A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]

  • FDM, RSM, Optimization Fabrication and Process Parameter Optimization of A 3D Printer Using Response Surface Methodology [(Articles in Press)]

  • Feasibility study Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]

  • Feasible Answer Using a new algorithm to improve the search answer in quadratic assignment problem (QAP) [Volume 10, Issue 2, 2021, Pages 165-173]

  • Feature selection A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]

  • Ferrous metals Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]

  • FIFO The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]

  • Finite commutative ring Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]

  • Fixed Point Theorem Some fixed point results involving a general LW-type cyclic mapping in complete b-metric-like spaces [Volume 8, Issue 3, 2019, Pages 262-273]

  • Fixed Point Theorem (FPT) Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]

  • Flexible job shop scheduling problem Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]

  • Flexible manufacturing systems Solving FMS Assignment Problem with Grouping Genetic Algorithm [Volume 1, Issue 3, 2012, Pages 60-68]

  • Flow shop scheduling problem A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]

  • Food waste Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]

  • Food Waste Hierarchy Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]

  • Forecast Error Determination of Optimum Smoothing Constant of Single Exponential Smoothing Method: A Case Study [Volume 6, Issue 3, 2017, Pages 184-192]

  • Frozen food An optimization model for cold chain food distribution [Volume 8, Issue 3, 2019, Pages 243-253]

  • FTOPSIS A Method for Evaluating Project Management Standards, Based on EFQM Criteria, Using FTOPSIS Method [Volume 3, Issue 3, 2014, Pages 1-12]

  • Full factorial DOE analysis Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis [Volume 10, Issue 2, 2021, Pages 117-127]

  • Fuzzified Decision-making computations Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]

  • Fuzzy Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]

  • Fuzzy Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [(Articles in Press)]

  • Fuzzy-AHP A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]

  • Fuzzy Analytic Hierarchy Process (FAHP) Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]

  • Fuzzy axiomatic design Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]

  • Fuzzy control charts Implementation of fuzzy rule-based algorithms in p control chart to improve the performance of statistical process control [Volume 7, Issue 4, 2018, Pages 441-459]

  • Fuzzy determinant Calculation of fuzzy matrices determinant [Volume 8, Issue 3, 2019, Pages 254-261]

  • Fuzzy failure modes Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]

  • Fuzzy FMEA Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]

  • Fuzzy linear programming Fuzzy Big-M Method for Solving Fuzzy Linear Programs with Trapezoidal Fuzzy Numbers [Volume 2, Issue 3, 2013, Pages 1-9]

  • Fuzzy logic Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]

  • Fuzzy mathematical programming A Novel Approach for Solving Fuzzy Multi-Objective Zero-One Linear Programming Problems [Volume 1, Issue 1, 2012, Pages 42-63]

  • Fuzzy mathematical programming A MOLFP Method for Solving Linear Fractional Programming Under Fuzzy Environment [Volume 6, Issue 3, 2017, Pages 202-213]

  • Fuzzy Numbers On solving two-person zero-sum fuzzy matrix games via linear programming approach [Volume 8, Issue 1, 2019, Pages 17-27]

  • Fuzzy Numbers A new method for solving fuzzy linear fractional programming problem with new ranking function [Volume 8, Issue 4, 2019, Pages 384-393]

  • Fuzzy Numbers Solving Semi-fully Fuzzy Linear Programming Problems [(Articles in Press)]

  • Fuzzy open shop scheduling problem A Novel Discrete Electromagnetism-Like for Fuzzy Open Shop Scheduling Problem with Parallel Machines to Minimize Makespan [Volume 1, Issue 3, 2012, Pages 1-25]

  • Fuzzy payoff On solving two-person zero-sum fuzzy matrix games via linear programming approach [Volume 8, Issue 1, 2019, Pages 17-27]

  • Fuzzy Sets Contractor Selection Using Fuzzy Hybrid AHP-VIKOR [Volume 2, Issue 4, 2013, Pages 26-40]

  • Fuzzy System Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]

  • Fuzzy theory Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]

  • Fuzzy TOPSIS Application of fuzzy AHP and TOPSIS methods for risk evaluation of gas transmission facility [Volume 8, Issue 4, 2019, Pages 339-365]

  • Fuzzy TOPSIS Improvement of the student-teacher learning interface with selecting and designing a teaching method [Volume 9, Issue 3, 2020, Pages 247-259]

  • Fuzzy VIKOR Contractor Selection Using Fuzzy Hybrid AHP-VIKOR [Volume 2, Issue 4, 2013, Pages 26-40]

G

  • GAMS Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]

  • Gap Analysis Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]

  • Gap Analysis Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]

  • Garments A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]

  • Gas Transmission Facility Application of fuzzy AHP and TOPSIS methods for risk evaluation of gas transmission facility [Volume 8, Issue 4, 2019, Pages 339-365]

  • GCD-Graph Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]

  • Generalized PCI A note on the generalized indices of process capability [Volume 9, Issue 3, 2020, Pages 286-303]

  • Genetic algorithm Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]

  • Genetic algorithm A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]

  • Genetic algorithm A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]

  • Genetic algorithm A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]

  • Genetic algorithm A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]

  • Genetic algorithm Robust Design of Maintenance Scheduling Considering Engineering Insurance Using Genetic Algorithm [Volume 3, Issue 1, 2014, Pages 39-48]

  • Genetic Algorithm An optimization model for aggregate production planning and control: a genetic algorithm approach [Volume 8, Issue 3, 2019, Pages 203-224]

  • Glass Fiber Reinforced Plastic (GFRP) Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]

  • Global Criteria Method A Multi-Objective Model for Location-Allocation Problem in a Supply Chain [Volume 4, 1(4), 2015, Pages 24-42]

  • Goal Programming Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]

  • Goodness of generalized PCI A note on the generalized indices of process capability [Volume 9, Issue 3, 2020, Pages 286-303]

  • Greedy Algorithm Greedy algorithm for solving student allocation problem in internship program: a case study [Volume 10, Issue 2, 2021, Pages 155-164]

  • Greenhouse gas emission Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]

  • Green Internet of things (G-IoT) A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]

  • Green manufacturing Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]

  • Green supply chain A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]

  • Green supply chain Optimization of a Green Supply Chain Network: A Case Study in a Pharmaceutical Industry. [(Articles in Press)]

  • Green Supply Chain Management An integrated multi-objective mathematical model to select suppliers in green supply chains [Volume 9, Issue 3, 2020, Pages 216-234]

  • Grounded theory Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]

H

  • Haar cascade classifier Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]

  • Haar cascade classifier Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]

  • Hamilton cycle Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]

  • Hardness Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]

  • Health care Modeling the Quality and Reliability Dependent Customer Satisfaction in Healthcare [Volume 3, Issue 2, 2014, Pages 33-45]

  • Healthcare A Robust Stochastic Programming Approach for Blood Collection and Distribution Network Design [Volume 3, Issue 2, 2014, Pages 1-11]

  • Healthcare centres Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]

  • Heavy metal Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]

  • HOQ An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]

  • Hospital sector Evaluation of the efficiency by DEA a case study of hospital [Volume 8, Issue 3, 2019, Pages 283-293]

  • Human factor Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]

  • Hybrid method The study of multi-objective supplier selection problem by a novel hybrid method: COA/ε-Constraint [(Articles in Press)]

I

  • Identification Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [(Articles in Press)]

  • Idle Time Application of line balancing heuristics for achieving an effective layout: a case study. [Volume 9, Issue 2, 2020, Pages 114-129]

  • IF-THEN rules Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]

  • Industrial chemistry Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]

  • Information system model Information system model for educational management in supply chain for Thai higher education institutions [Volume 10, Issue 2, 2021, Pages 87-94]

  • Information system model Supply Chain Management Information System Model for quality assurance in educational management for ASEAN University Network Quality Assurance (AUN-QA) [(Articles in Press)]

  • Innovation The Impact of Total Quality Management on Organizational Innovation [Volume 2, Issue 1, 2013, Pages 1-11]

  • Integer programming A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]

  • Integer programming An optimization model for cold chain food distribution [Volume 8, Issue 3, 2019, Pages 243-253]

  • Integrated Approach Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]

  • Integration model A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]

  • Integration model Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]

  • Interdiction An Interdiction Median Model for Hierarchical Capacitated Facilities [Volume 3, Issue 1, 2014, Pages 1-10]

  • Internship Program Greedy algorithm for solving student allocation problem in internship program: a case study [Volume 10, Issue 2, 2021, Pages 155-164]

  • Interval numbers Solving Semi-fully Fuzzy Linear Programming Problems [(Articles in Press)]

  • Interval type-2 fuzzy sets Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables [Volume 10, Issue 2, 2021, Pages 138-154]

  • Inventory control Improving the Performance of Planning and Controlling Raw Material Inventory in Food Industry [(Articles in Press)]

  • Investment Opportunity Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]

  • IoT Cloud-based IoT: integration cloud computing with internet of things [Volume 7, Issue 4, 2018, Pages 482-494]

  • Iranian automotive industries Evaluation of Iranian automotive industries [Volume 8, Issue 2, 2019, Pages 115-139]

  • Iran Industry Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]

J

  • Job Rotation Applying mathematical modeling to create job rotation for improve workforce performance in semi-automatic systems [Volume 9, Issue 4, 2020, Pages 318-327]

  • Jump diffusion model Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]

  • Jupyter Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]

K

  • Kaizen Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]

  • Keywords: Six Sigma Implementation of Six Sigma DMAIC methodology for increasing the competitiveness of SMEs in Ethiopia [Volume 10, Issue 1, 2021, Pages 1-8]

  • Keywords: TPM Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study [Volume 8, Issue 2, 2019, Pages 140-157]

  • Kinetic Energy Wastage Energy wastage on an automobile due to speed breakers: a case study on Woldia town [Volume 9, Issue 2, 2020, Pages 202-208]

  • K-Nearest Neighbors Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]

  • Kurtosis Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]

L

  • Lagging Indicators Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]

  • Lagos Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]

  • Lagrangian Relaxation A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]

  • Lane-Emden equation Non-Standard Finite Difference Schemes for Solving Singular Lane-Emden Equation [Volume 6, Issue 2, 2017, Pages 161-171]

  • Leader-Follower Game Modeling of the supply chain of cooperative game between two tiers of retailer and manufacturer under conditions of uncertainty [Volume 10, Issue 2, 2021, Pages 95-116]

  • Leading Indicators Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]

  • Lean manufacturing Analyzing the Impact of 5S Implementation in the Manufacturing Department: A Case Study [(Articles in Press)]

  • Lean principles Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]

  • Lean Tools An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]

  • Least common multiple Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]

  • Level of Service Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]

  • Linear Programming Scheduling Project Crashing Time Using Linear Programming Approach: Case Study [Volume 6, Issue 4, 2017, Pages 283-292]

  • Linear Programming Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]

  • Linear Programming Solving Semi-fully Fuzzy Linear Programming Problems [(Articles in Press)]

  • Linear programming problem A MOLFP Method for Solving Linear Fractional Programming Under Fuzzy Environment [Volume 6, Issue 3, 2017, Pages 202-213]

  • Linear programming problem Modified Method for Solving Fully Fuzzy Linear Programming Problem with Triangular Fuzzy Numbers [Volume 6, Issue 4, 2017, Pages 293-311]

  • Line balancing techniques Application of line balancing heuristics for achieving an effective layout: a case study. [Volume 9, Issue 2, 2020, Pages 114-129]

  • Linguistic Variables Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables [Volume 10, Issue 2, 2021, Pages 138-154]

  • Literature Review Multi-objective sequence dependent setup times hybrid flowshop scheduling: A literature review [Volume 7, Issue 3, 2018, Pages 254-306]

  • Lunch break A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]

  • LW-type cyclic mapping Some fixed point results involving a general LW-type cyclic mapping in complete b-metric-like spaces [Volume 8, Issue 3, 2019, Pages 262-273]

  • LW-Type Lipschitz Cyclic Mapping (LTLCM) Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]

M

  • Machine Learning Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]

  • Machine Learning Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]

  • Machine Learning Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]

  • Machine Learning Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]

  • Machine Learning Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]

  • Magneticfield Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]

  • Make to Order (MTO) Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]

  • Make to Stock (MTS) Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]

  • Manpower Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]

  • Manufacturing resources Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]

  • Manufacturing system Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]

  • Marcucci approach Implementation of fuzzy rule-based algorithms in p control chart to improve the performance of statistical process control [Volume 7, Issue 4, 2018, Pages 441-459]

  • Marketing Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [(Articles in Press)]

  • Market Orientation Extracting of Relationships Between Modern Management Techniques in SME Manufacturing Support and Procurement of Equipment for Oil Companies of Iran [Volume 6, Issue 2, 2017, Pages 106-120]

  • Mathematical Modeling Applying mathematical modeling to create job rotation for improve workforce performance in semi-automatic systems [Volume 9, Issue 4, 2020, Pages 318-327]

  • Mathematical Modeling A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]

  • MATLAB software Excessive sound noise risk assessment in textile mills of an Ethiopian-Kombolcha textile industry share company [Volume 8, Issue 2, 2019, Pages 105-114]

  • Matrix games On solving two-person zero-sum fuzzy matrix games via linear programming approach [Volume 8, Issue 1, 2019, Pages 17-27]

  • Measurement error Designing the Multivariate Nonconforming Proportion Control Charts Considering the Measurement Error [(Articles in Press)]

  • Meta-heuristic Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]

  • Meta- heuristic algorithm Solving a new multi-objective resource constrained project scheduling problem by SAICA and compare it with DE method [Volume 7, Issue 2, 2018, Pages 147-183]

  • Metaheuristic Algorithms Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]

  • Metaheuristic Algorithms A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]

  • Metaheuristics Modeling and Scheduling University Course Timetabling Problems [Volume 5, 1(4), 2016, Pages 1-15]

  • Microsilica Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]

  • MILP Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]

  • Minimization optimization model Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis [Volume 10, Issue 2, 2021, Pages 117-127]

  • Mismatch Ergonomic furniture design for secondary girls school in Bangladesh [Volume 8, Issue 2, 2019, Pages 187-202]

  • Missing Judgments Developing 360 degree performance evaluation method for school teachers [Volume 8, Issue 1, 2019, Pages 28-39]

  • MODAPTS Estimating Duration of Projects Manual Tasks Using MODAPTS plus Method [Volume 2, Issue 1, 2013, Pages 12-19]

  • Model development Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]

  • Monte Carlo Method A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]

  • Most Productive Scale Size Data Envelopment Analysis Based on MPSS Efficient and Inefficient Frontiers [Volume 2, Issue 4, 2013, Pages 15-25]

  • Most Productive Scale Size A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]

  • Movie Recommendation Movie recommendation system using machine learning [Volume 9, Issue 1, 2020, Pages 84-98]

  • Multi-criteria Contractor Selection Using Fuzzy Hybrid AHP-VIKOR [Volume 2, Issue 4, 2013, Pages 26-40]

  • Multi-criteria decision making A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]

  • Multi-criteria decision making Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]

  • Multi-criteria decision making Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]

  • Multi-Criteria Decision Making Methods Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]

  • Multi-depot Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]

  • Multi-objective algorithms Multi-objective sequence dependent setup times hybrid flowshop scheduling: A literature review [Volume 7, Issue 3, 2018, Pages 254-306]

  • Multi-objective decision making problem A signed distance method for solving multi-objective transportation problems in fuzzy environment [Volume 8, Issue 3, 2019, Pages 274-282]

  • Multi-Objective Optimization Solving FMS Assignment Problem with Grouping Genetic Algorithm [Volume 1, Issue 3, 2012, Pages 60-68]

  • Multi-Objective Optimization Solving a Bi-Objective Transportation Vehicle Routing Problem for Waste Collection by a New Hybrid Algorithm [Volume 5, 1(4), 2016, Pages 16-42]

  • Multi-Objective Optimization Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]

  • Multi-Objective Optimization Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]

  • Multi-objective Programming A Multi-Objective Model for Location-Allocation Problem in a Supply Chain [Volume 4, 1(4), 2015, Pages 24-42]

  • Multi-objective supplier selection An integrated multi-objective mathematical model to select suppliers in green supply chains [Volume 9, Issue 3, 2020, Pages 216-234]

  • Multi-objective transportation problem A signed distance method for solving multi-objective transportation problems in fuzzy environment [Volume 8, Issue 3, 2019, Pages 274-282]

  • Multi-objective transportation problem, (&alpha A Signed Distance Method for Solving Multi-Objective Transportation Problems in Fuzzy Environment [(Articles in Press)]

  • Multi-objective zero-one linear programming A Novel Approach for Solving Fuzzy Multi-Objective Zero-One Linear Programming Problems [Volume 1, Issue 1, 2012, Pages 42-63]

  • Multi-Period A Robust Stochastic Programming Approach for Blood Collection and Distribution Network Design [Volume 3, Issue 2, 2014, Pages 1-11]

  • Multi-Period Multi-Attribute Group Decision-Making Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables [Volume 10, Issue 2, 2021, Pages 138-154]

  • Multi-Period Trapezoidal Interval Type-2 Fuzzy Number Weighted Arithmetic operator Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables [Volume 10, Issue 2, 2021, Pages 138-154]

  • Multiple Attribute Group Decision Making Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]

  • Multiple Criteria Decision Making Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]

  • Multiple Layer DEA Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]

  • Multiple regression Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]

  • Multi-product assembly line Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]

  • Multivariate Control Chart Designing the Multivariate Nonconforming Proportion Control Charts Considering the Measurement Error [(Articles in Press)]

  • Murtala Muhammed international airport (MMIA) Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]

N

  • Nanotechnology Reviewing on Nanotechnology for Creating Antimicrobial for Chicken Feed: Max-Min Optimization Approach [Volume 6, Issue 4, 2017, Pages 312-327]

  • Nash bargaining game model A New Bargaining Game Model for Measuring Performance of Two-Stage Network Structures [Volume 1, Issue 2, 2012, Pages 27-39]

  • Neka power plant Evaluating the Implementation of Strategies in Plants Using Balanced Scorecard (BSC): A Case Study [Volume 6, Issue 1, 2017, Pages 39-50]

  • Network analysis process Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [(Articles in Press)]

  • Non-Destructive Testing (NDT) Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]

  • Nonlinear analysis Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]

  • Nonlinear equations A Barzilai Borwein Adaptive Trust-Region Method for Solving Systems of Nonlinear Equation [Volume 6, Issue 4, 2017, Pages 339-349]

  • Non-linear Programming Developing 360 degree performance evaluation method for school teachers [Volume 8, Issue 1, 2019, Pages 28-39]

  • Non-Standard finite difference Non-Standard Finite Difference Schemes for Solving Singular Lane-Emden Equation [Volume 6, Issue 2, 2017, Pages 161-171]

  • Non-trivial divisor Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]

  • Non-unit elements Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]

  • NumPy Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]

  • NumPy Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]

  • NumPy Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]

  • Nurse scheduling A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]

O

  • Office chair Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]

  • OpenCV Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]

  • OpenCV Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]

  • OpenCV Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]

  • OpenCV Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]

  • Open Innovation Customer Involvement in Innovation Process Based on Open Innovation Concepts [Volume 1, Issue 2, 2012, Pages 1-9]

  • OpenIoT Cloud-based IoT: integration cloud computing with internet of things [Volume 7, Issue 4, 2018, Pages 482-494]

  • Open Vehicle Routing Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]

  • Operating room A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]

  • Operational Performance Extracting of Relationships Between Modern Management Techniques in SME Manufacturing Support and Procurement of Equipment for Oil Companies of Iran [Volume 6, Issue 2, 2017, Pages 106-120]

  • Optimal control Optimal Control strategy on the transmission dynamics of Human Papillomavirus (HPV) and Human Immunodeficiency Viruses (HIV) coinfection [(Articles in Press)]

  • Optimal flowing method A signed distance method for solving multi-objective transportation problems in fuzzy environment [Volume 8, Issue 3, 2019, Pages 274-282]

  • Optimal fuzzy strategy On solving two-person zero-sum fuzzy matrix games via linear programming approach [Volume 8, Issue 1, 2019, Pages 17-27]

  • Optimal order allocation An integrated multi-objective mathematical model to select suppliers in green supply chains [Volume 9, Issue 3, 2020, Pages 216-234]

  • Optimal reactive power Factual power loss reduction by augmented monkey optimization algorithm [Volume 9, Issue 1, 2020, Pages 1-12]

  • Optimal reactive power Amplified black hole algorithm for real power loss reduction [Volume 9, Issue 2, 2020, Pages 130-142]

  • Optimal reactive power Real power loss reduction by Acridoidea stirred artificial bee colony algorithm [Volume 9, Issue 3, 2020, Pages 209-215]

  • Optimal transportation A signed distance method for solving multi-objective transportation problems in fuzzy environment [Volume 8, Issue 3, 2019, Pages 274-282]

  • Optimisation protocol Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]

  • Option pricing Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]

  • Option pricing model Comprehensive Method to Determine Real Option Utilizing Probability Distribution [Volume 3, Issue 1, 2014, Pages 11-25]

  • Order picking problem Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]

  • Ordinal logistic regression Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]

  • Ordinal responses Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]

  • OTP Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]

  • Outsourcing An Interdiction Median Model for Hierarchical Capacitated Facilities [Volume 3, Issue 1, 2014, Pages 1-10]

  • Overall Equipment Effectiveness (OEE) Application of total productive maintenance in service organization [Volume 8, Issue 2, 2019, Pages 176-186]

P

  • Packaging standards Assessing the awareness of local consumer’s product producers towards packaging standards in Tanzania [Volume 8, Issue 1, 2019, Pages 40-52]

  • Pareto Chart Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study [Volume 8, Issue 2, 2019, Pages 140-157]

  • Pareto Frontier The study of multi-objective supplier selection problem by a novel hybrid method: COA/ε-Constraint [(Articles in Press)]

  • Partial slip Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]

  • Particle cumulative optimization (PSO) algorithm Optimum solar and wind model with particle optimization (PSO) [Volume 7, Issue 4, 2018, Pages 460-467]

  • Particle swarm optimisation Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]

  • Passengers’ satisfaction Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]

  • Passengers’ Traffic The impact of passenger's traffic on exchange rate and economic growth in Nigerian aviation industry [Volume 9, Issue 4, 2020, Pages 364-378]

  • Performance Assessment Developing 360 degree performance evaluation method for school teachers [Volume 8, Issue 1, 2019, Pages 28-39]

  • Performance Evaluation Efficiency Evaluation and Ranking of the Research Center at the Ministry of Energy: A Data Envelopment Analysis Approach [Volume 1, Issue 1, 2012, Pages 10-18]

  • Performance Evaluation Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]

  • Performance Evaluation Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]

  • Performance Evaluation Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]

  • Peristaltic flow Influence of Wall Properties on the Peristaltic Flow of a Jeffrey Fluid in a Uniform Porous Channel under Heat Transfer [Volume 6, Issue 3, 2017, Pages 246-261]

  • Permanent Magnet Optimal Design of PM Synchronous Generator for Aerial Industries Power Supply Using Cuckoo Algorithm [Volume 3, Issue 3, 2014, Pages 49-68]

  • Pharmaceutical Company Optimization of a Green Supply Chain Network: A Case Study in a Pharmaceutical Industry. [(Articles in Press)]

  • PM A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]

  • PM Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]

  • Poisson Process A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]

  • Poisson Process A note on the generalized indices of process capability [Volume 9, Issue 3, 2020, Pages 286-303]

  • Potential Energy Wastage Energy wastage on an automobile due to speed breakers: a case study on Woldia town [Volume 9, Issue 2, 2020, Pages 202-208]

  • Power Generation Economical Evaluation of Subsidy Omitting Effect on the Renewable Energy Position in Power Generation in Iran [Volume 2, Issue 2, 2013, Pages 17-34]

  • Predictive Maintenance Robust Design of Maintenance Scheduling Considering Engineering Insurance Using Genetic Algorithm [Volume 3, Issue 1, 2014, Pages 39-48]

  • Primary School Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]

  • Principal ideal Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]

  • PRIORITATION Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [(Articles in Press)]

  • Process mining Applying the Process Mining Project Methodology for Insurance Risks Reduction [Volume 3, Issue 4, 2014, Pages 57-69]

  • Process Mining Project Methodology Applying the Process Mining Project Methodology for Insurance Risks Reduction [Volume 3, Issue 4, 2014, Pages 57-69]

  • Process quality A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]

  • Process quality Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]

  • Produced Water Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]

  • Product Assessing the awareness of local consumer’s product producers towards packaging standards in Tanzania [Volume 8, Issue 1, 2019, Pages 40-52]

  • Production Planning Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]

  • Production scheduling A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]

  • Production scheduling Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]

  • Production System An optimization model for aggregate production planning and control: a genetic algorithm approach [Volume 8, Issue 3, 2019, Pages 203-224]

  • Productivity The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]

  • Productivity Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]

  • Product prioritization A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]

  • Project management standards A Method for Evaluating Project Management Standards, Based on EFQM Criteria, Using FTOPSIS Method [Volume 3, Issue 3, 2014, Pages 1-12]

  • Project portfolio selection A Novel Approach for Solving Fuzzy Multi-Objective Zero-One Linear Programming Problems [Volume 1, Issue 1, 2012, Pages 42-63]

  • Project scheduling Solving a new multi-objective resource constrained project scheduling problem by SAICA and compare it with DE method [Volume 7, Issue 2, 2018, Pages 147-183]

  • Project selection Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]

  • PyCharm Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]

  • PyCharm Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]

  • Python Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]

  • Python Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]

  • Python Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]

  • Python Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]

  • Python Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]

Q

  • QR menu A short communication article on contactless menu [Volume 9, Issue 4, 2020, Pages 313-317]

  • Quadratic assignment problem A simulated annealing optimization algorithm for equal and un-equal area construction site layout problem [Volume 8, Issue 2, 2019, Pages 89-104]

  • Quality Modeling the Quality and Reliability Dependent Customer Satisfaction in Healthcare [Volume 3, Issue 2, 2014, Pages 33-45]

  • Quality Assurance Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]

  • Quality assurance in educational management Supply Chain Management Information System Model for quality assurance in educational management for ASEAN University Network Quality Assurance (AUN-QA) [(Articles in Press)]

  • Quality Control A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]

  • Quality Function Deployment The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]

  • Quality Function Deployment An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]

  • Quantitative responses Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]

R

  • Random Fuzzy Data Envelopment Analysis The survey of data envelopment analysis models in fuzzy stochastic environments [Volume 8, Issue 4, 2019, Pages 366-383]

  • Ranking Fuzzy Big-M Method for Solving Fuzzy Linear Programs with Trapezoidal Fuzzy Numbers [Volume 2, Issue 3, 2013, Pages 1-9]

  • Ranking Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]

  • Ranking Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]

  • Ranking Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]

  • Ranking method A New Method to Organizational Ranking: Integrating BSC and DEA [Volume 1, Issue 3, 2012, Pages 39-47]

  • Ranking models A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]

  • Ranking operating rooms Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]

  • Ranking Technique The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]

  • RATING Movie recommendation system using machine learning [Volume 9, Issue 1, 2020, Pages 84-98]

  • RCA+ Identifying Buyer-Supplier Conflict in Collaborative Process New Product Development [Volume 3, Issue 2, 2014, Pages 12-23]

  • Reallocation Greedy algorithm for solving student allocation problem in internship program: a case study [Volume 10, Issue 2, 2021, Pages 155-164]

  • Recommender systems Classification and Comparison of the Hybrid Collaborative Filtering Systems [Volume 6, Issue 2, 2017, Pages 129-148]

  • Recycled grain Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]

  • Redundancy allocation problem A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]

  • REGIME Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]

  • Relationship Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]

  • Relationship-oriented marketing How Implementation of E-CRM May Enhance an Organization’s Internal and External Success [Volume 1, Issue 2, 2012, Pages 58-71]

  • Relative entropy [0,1] Truncated Fréchet-Weibull and Fréchet Distributions [Volume 7, Issue 1, 2018, Pages 106-135]

  • Reliability A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]

  • Reliability Modeling the Quality and Reliability Dependent Customer Satisfaction in Healthcare [Volume 3, Issue 2, 2014, Pages 33-45]

  • Reliability Block Diagram (RBD) A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]

  • Relief Logistics Integrated and periodic relief logistics planning for reaction phase in uncertainty condition and model solving by PSO algorithm [Volume 8, Issue 4, 2019, Pages 294-311]

  • Renewable Energy Economical Evaluation of Subsidy Omitting Effect on the Renewable Energy Position in Power Generation in Iran [Volume 2, Issue 2, 2013, Pages 17-34]

  • Renewable Energy Optimum solar and wind model with particle optimization (PSO) [Volume 7, Issue 4, 2018, Pages 460-467]

  • Resource constrained project scheduling Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]

  • Resource-Constrained Project Scheduling Problem (RCPSP) Solving a new multi-objective resource constrained project scheduling problem by SAICA and compare it with DE method [Volume 7, Issue 2, 2018, Pages 147-183]

  • Resource tardiness penalty costs Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]

  • RFM Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]

  • RFM model Customer segmentation to identify key customers based on RFM model by using data mining techniques [(Articles in Press)]

  • Rice Husk Ash Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]

  • Risk Assessment Application of fuzzy AHP and TOPSIS methods for risk evaluation of gas transmission facility [Volume 8, Issue 4, 2019, Pages 339-365]

  • Risk-neutral measure Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]

  • Risk priority number Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]

  • RMG Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]

  • Robotic mixed-model assembly line balancing (RMALB) Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]

  • RSM Formulation of a customer-oriented product and determination of optimum design parameters using response surface methodology [Volume 9, Issue 4, 2020, Pages 349-363]

S

  • Scheduling system Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]

  • Score function Modified solution for neutrosophic linear programming problems with mixed constraints [Volume 9, Issue 1, 2020, Pages 13-24]

  • Security Restricting shoulder surfing: a modified graphical password Technique [Volume 8, Issue 4, 2019, Pages 394-405]

  • Segment Customer segmentation to identify key customers based on RFM model by using data mining techniques [(Articles in Press)]

  • Self-Adaptive Imperialist Competitive Algorithm (SAICA) Solving a new multi-objective resource constrained project scheduling problem by SAICA and compare it with DE method [Volume 7, Issue 2, 2018, Pages 147-183]

  • Sensitivity analysis Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]

  • Sensitivity analysis Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]

  • Sequence Dependent Setup Times Multi-objective sequence dependent setup times hybrid flowshop scheduling: A literature review [Volume 7, Issue 3, 2018, Pages 254-306]

  • Service Quality Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]

  • Shadow Boarding Foam Analyzing the Impact of 5S Implementation in the Manufacturing Department: A Case Study [(Articles in Press)]

  • Shannon Entropy A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]

  • Shannon Entropy An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]

  • Shannon Entropy [0,1] Truncated Fréchet-Weibull and Fréchet Distributions [Volume 7, Issue 1, 2018, Pages 106-135]

  • Shape-changeable furniture design Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis [Volume 10, Issue 2, 2021, Pages 117-127]

  • Simulated Annealing Solving Fuzzy Step Fixed Charge Transportation Problems via Metaheuristics [Volume 2, Issue 3, 2013, Pages 24-34]

  • Simulated Annealing Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]

  • Simulated Annealing A simulated annealing optimization algorithm for equal and un-equal area construction site layout problem [Volume 8, Issue 2, 2019, Pages 89-104]

  • Simulated Annealing Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]

  • Simulated Annealing Algorithm A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]

  • Simulated Annealing Algorithm Applying mathematical modeling to create job rotation for improve workforce performance in semi-automatic systems [Volume 9, Issue 4, 2020, Pages 318-327]

  • Simulation Simulation in Citizen Relationship Management [Volume 1, Issue 3, 2012, Pages 48-59]

  • Simulation Optimal Control strategy on the transmission dynamics of Human Papillomavirus (HPV) and Human Immunodeficiency Viruses (HIV) coinfection [(Articles in Press)]

  • Simulation modeling A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]

  • Six Sigma Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]

  • Six Sigma Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]

  • Skewness Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]

  • Small and Medium Enterprises (SMEs) Implementation of Six Sigma DMAIC methodology for increasing the competitiveness of SMEs in Ethiopia [Volume 10, Issue 1, 2021, Pages 1-8]

  • Smart business A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]

  • Smart Supply Chain A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]

  • Smart Voting System Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]

  • SMEs Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]

  • Smoothing Constant Determination of Optimum Smoothing Constant of Single Exponential Smoothing Method: A Case Study [Volume 6, Issue 3, 2017, Pages 184-192]

  • Soft constraints Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]

  • Speed breaker Energy wastage on an automobile due to speed breakers: a case study on Woldia town [Volume 9, Issue 2, 2020, Pages 202-208]

  • Stability Optimal Control strategy on the transmission dynamics of Human Papillomavirus (HPV) and Human Immunodeficiency Viruses (HIV) coinfection [(Articles in Press)]

  • Stackelberg game Modeling of the supply chain of cooperative game between two tiers of retailer and manufacturer under conditions of uncertainty [Volume 10, Issue 2, 2021, Pages 95-116]

  • Stagnation point Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]

  • Standards evaluation A Method for Evaluating Project Management Standards, Based on EFQM Criteria, Using FTOPSIS Method [Volume 3, Issue 3, 2014, Pages 1-12]

  • Statistical process control A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]

  • Step Fixed Charge Solving Fuzzy Step Fixed Charge Transportation Problems via Metaheuristics [Volume 2, Issue 3, 2013, Pages 24-34]

  • Stochastic programming A Robust Stochastic Programming Approach for Blood Collection and Distribution Network Design [Volume 3, Issue 2, 2014, Pages 1-11]

  • Stress-strength model [0,1] Truncated Fréchet-Weibull and Fréchet Distributions [Volume 7, Issue 1, 2018, Pages 106-135]

  • Students Greedy algorithm for solving student allocation problem in internship program: a case study [Volume 10, Issue 2, 2021, Pages 155-164]

  • Super Efficiency The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]

  • Supplier selection A New Method for Solving Fully Fuzzy Multi Objective Supplier Selection Problem [Volume 6, Issue 3, 2017, Pages 214-227]

  • Supply chain Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]

  • Supply chain Collaborative Information System for Managing the Supply Chain: Architecture Based on a Multi Agent System [Volume 2, Issue 2, 2013, Pages 1-16]

  • Supply chain Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]

  • Supply chain Dynamic Pricing Decisions for Substitutable Products [Volume 6, Issue 2, 2017, Pages 149-160]

  • Supply chain A New Method for Solving Fully Fuzzy Multi Objective Supplier Selection Problem [Volume 6, Issue 3, 2017, Pages 214-227]

  • Supply chain A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 7, Issue 4, 2018, Pages 423-440]

  • Supply chain A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 8, Issue 3, 2019, Pages 225-242]

  • Supply chain Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]

  • Supply chain design, Facility location-allocation A Multi-Objective Model for Location-Allocation Problem in a Supply Chain [Volume 4, 1(4), 2015, Pages 24-42]

  • Supply chain management Fuzzy Goal Programming for Linear Facility Location-Allocation in a Supply Chain; The Case of Steel Industry [Volume 6, Issue 2, 2017, Pages 90-105]

  • Supply chain management A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]

  • Supply chain management Supply Chain Management Information System Model for quality assurance in educational management for ASEAN University Network Quality Assurance (AUN-QA) [(Articles in Press)]

  • Supply chain network A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]

  • Support Vector Machine Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]

  • Swarm Optimizations Algorithm Integrated and periodic relief logistics planning for reaction phase in uncertainty condition and model solving by PSO algorithm [Volume 8, Issue 4, 2019, Pages 294-311]

  • Symmetric Trapezoidal Fuzzy Numbers Fuzzy Big-M Method for Solving Fuzzy Linear Programs with Trapezoidal Fuzzy Numbers [Volume 2, Issue 3, 2013, Pages 1-9]

  • Synthetic Extent Weighted Average (SEWA) Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]

  • System reliability estimation A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]

T

  • Tabu Search A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]

  • Taguchi method Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]

  • Takt Time The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]

  • Tariffs Economical Evaluation of Subsidy Omitting Effect on the Renewable Energy Position in Power Generation in Iran [Volume 2, Issue 2, 2013, Pages 17-34]

  • Task duration estimation Estimating Duration of Projects Manual Tasks Using MODAPTS plus Method [Volume 2, Issue 1, 2013, Pages 12-19]

  • Tchebycheff norm Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]

  • Teaching method, Learning style, Quality function deployment Improvement of the student-teacher learning interface with selecting and designing a teaching method [Volume 9, Issue 3, 2020, Pages 247-259]

  • Textile Mill Excessive sound noise risk assessment in textile mills of an Ethiopian-Kombolcha textile industry share company [Volume 8, Issue 2, 2019, Pages 105-114]

  • Thai higher education institutions Information system model for educational management in supply chain for Thai higher education institutions [Volume 10, Issue 2, 2021, Pages 87-94]

  • Three-parameter grey interval incidence degree A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]

  • Threeparameter grey interval incidence degree An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]

  • Three-parameter interval grey numbers An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]

  • Threeparameter interval grey numbers A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]

  • Time-Windows An optimization model for cold chain food distribution [Volume 8, Issue 3, 2019, Pages 243-253]

  • TOPSIS A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]

  • TOPSIS Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]

  • TOPSIS Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]

  • TOPSIS Selecting the optimal industrial investment by multi-criteria decision-making methods with emphasis on, TOPSIS, VIKOR, and COPRAS (case study of Guilan province) [Volume 8, Issue 4, 2019, Pages 312-324]

  • TOPSIS An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]

  • Total Productive Maintenance (TPM) Application of total productive maintenance in service organization [Volume 8, Issue 2, 2019, Pages 176-186]

  • Total Quality Management The Impact of Total Quality Management on Organizational Innovation [Volume 2, Issue 1, 2013, Pages 1-11]

  • Total Quality Management Extracting of Relationships Between Modern Management Techniques in SME Manufacturing Support and Procurement of Equipment for Oil Companies of Iran [Volume 6, Issue 2, 2017, Pages 106-120]

  • Total Quality Management Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]

  • Transmission Loss Factual power loss reduction by augmented monkey optimization algorithm [Volume 9, Issue 1, 2020, Pages 1-12]

  • Transmission Loss Amplified black hole algorithm for real power loss reduction [Volume 9, Issue 2, 2020, Pages 130-142]

  • Transmission Loss Real power loss reduction by Acridoidea stirred artificial bee colony algorithm [Volume 9, Issue 3, 2020, Pages 209-215]

  • Transportation of products Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [(Articles in Press)]

  • Transportation problem A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]

  • Transportation Problems Solving Fuzzy Step Fixed Charge Transportation Problems via Metaheuristics [Volume 2, Issue 3, 2013, Pages 24-34]

  • Trend Analysis Trend extrapolation of domestic air travel demand in Nigeria (2018-2030) [Volume 7, Issue 4, 2018, Pages 468-481]

  • Trial and error method Determination of Optimum Smoothing Constant of Single Exponential Smoothing Method: A Case Study [Volume 6, Issue 3, 2017, Pages 184-192]

  • Two Bin System The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]

  • Two-level four-factor DOE Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis [Volume 10, Issue 2, 2021, Pages 117-127]

U

  • Ultrasonic test Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]

  • University canteen Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]

  • University course scheduling Modeling and Scheduling University Course Timetabling Problems [Volume 5, 1(4), 2016, Pages 1-15]

  • Unsteady nanofluid flow Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]

  • U-shaped assembly line Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]

V

  • Value Analysis The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]

  • Value-at-Risk Fuzzy Index Tracking Portfolio Selection Model Based on Value-at-Risk [Volume 2, Issue 4, 2013, Pages 41-57]

  • Variable Neighbourhood Search Solving Fuzzy Step Fixed Charge Transportation Problems via Metaheuristics [Volume 2, Issue 3, 2013, Pages 24-34]

  • VIKOR Selecting the optimal industrial investment by multi-criteria decision-making methods with emphasis on, TOPSIS, VIKOR, and COPRAS (case study of Guilan province) [Volume 8, Issue 4, 2019, Pages 312-324]

  • Visual inspection Analyzing the Impact of 5S Implementation in the Manufacturing Department: A Case Study [(Articles in Press)]

  • Voter Id Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]

W

  • Wall thickness Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]

  • Waste An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]

  • Waste collection Solving a Bi-Objective Transportation Vehicle Routing Problem for Waste Collection by a New Hybrid Algorithm [Volume 5, 1(4), 2016, Pages 16-42]

  • Wastewater Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]

  • Water and air pollution Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]

  • Water Treatment Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]

  • Weight restrictions Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]

  • WHGS3 sesame price Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]

  • Woldia University Application of total productive maintenance in service organization [Volume 8, Issue 2, 2019, Pages 176-186]

  • World-Class The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]

X

  • XTriz Identifying Buyer-Supplier Conflict in Collaborative Process New Product Development [Volume 3, Issue 2, 2014, Pages 12-23]

Y

  • YOLO Comparative analysis on YOLO object detection with OpenCV [Volume 9, Issue 1, 2020, Pages 46-64]