Evaluation of Iranian automotive industries

Document Type: Research Paper

Author

Department of Environmental Science, UCS, Osmania University, Telangana State.

10.22105/riej.2019.183148.1085

Abstract

The automotive industry comprises all sectors of the design, development, and production as well as marketing and selling of vehicles. Iran's automotive industries possess the largest sector after the oil and petroleum sectors in Iran. The preliminary assessments taken by both of Iranian industries organization and environment protection agency were reported to the presence of around 71 various kinds of Iranian Automotive Industries (IAI) and provided the data from initial screening once prior to set up industries and process by present research. Current cluster study is targeted to weight and rank all the IAI empirically via Simple Additive Weighting (SAW) and COmplex PRoportional ASsessment (COPRAS) methods supported with weighing systems of Friedman test and Entropy Shannon, SPSS IBM 20, and Excel 2013 software to process raw data. The SAW method is resulted to classify IAI from the largest industry to the smallest one depends on 5 criteria, such as the number of staff, energy consumed (water, fuel, and power), and the land area used. COPRAS model is assigned to rank IAI pertaining to both negative and positive criteria. Finally, awareness of input materials stream introduced into IAI cycle paves the way towards the development of studies related to industrial ecology and industry 4.0.

Keywords

Main Subjects


[1]     Abedini, J., & Péridy, N. (2009). The emergence of Iran in the world car industry: An estimation of its export potential. World economy32(5), 790-818.

[2]     Database of Iranian industries organization. (2018). Retrieved from http://www.mimt.gov.ir/

[3]     Zavadskas, E. K., Kaklauskas, A., & Kvederytė, N. (2001). Multivariant design and multiple criteria analysis of a building life cycle. Informatica12(1), 169-188.

[4]     Vilutienė, T., & Zavadskas, E. K. (2003). The application of multi-criteria analysis to decision support for the facility management of a residential district. Journal of civil engineering and management9(4), 241-252.

[5]     Zavadskas, E. K., Kaklauskas, A., Banaitis, A., & Kvederyte, N. (2004). Housing credit access model: The case for Lithuania. European journal of operational research155(2), 335-352.

[6]     Kaklauskas, A., Zavadskas, E. K., & Raslanas, S. (2005). Multivariant design and multiple criteria analysis of building refurbishments. Energy and buildings37(4), 361-372.

[7]      Kaklauskas, A., Zavadskas, E. K., Raslanas, S., Ginevicius, R., Komka, A., & Malinauskas, P. (2006). Selection of low-e windows in retrofit of public buildings by applying multiple criteria method COPRAS: a lithuanian case. Energy and buildings38(5), 454-462.

[8]     Zavadskas, E. K., & Turskis, Z. (2008). A new logarithmic normalization method in games theory. Informatica19(2), 303-314.

[9]     El Mkhalet, M. O. U. N. A., Aziz, S., & Saidi, R. (2018). The application of Entropy-rov methods to formulate global performance for selecting the automotive suppliers in morocco. Journal of theoretical and applied information technology96(16).

[10]  Danaei, J. (2017). Prioritization of kish airport projects using multi-criteria decision-making (weighting: shannon Entropy). Amazonia investiga6(11).

[11]  Ozturk, D. (2017). Assessment of urban sprawl using Shannon’s Entropy and fractal analysis: a case study of Atakum, Ilkadim and Canik (Samsun, Turkey). Journal of environmental engineering and landscape management25(3), 264-276.

[12]  Hashemzadeh, G., Khoshtarkib, M., & Hajizadeh, S. (2014). Identification and weighting factors influencing the establishment of a single minute exchange of dies in plastic injection industry using VIKOR and Shannon Entropy. Management science letters4(5), 977-984.

[13]   Zolfani, S. H., & Zavadskas, E. K. (2013). Sustainable development of rural areas’ building structures based on local climate. Procedia engineering57, 1295-1301.

[14]  Popović, G., Stanujkić, D., & Stojanović, S. (2012). Investment project selection by applying copras method and imprecise data. Serbian journal of management7(2), 257-269.

[15]  Medineckienė, M., Turskis, Z., & Zavadskas, E. K. (2011). Life-Cycle analysis of a sustainable building, applying Multi-Criteria Decision Making method. The 8th international conference environmental engineering (pp. 957-961). Vilniaus Gedimino technikos universitetas.

[16]  Vujičić, M., Blagojević, M., & Papić, M. (2016). Application of COPRAS MCDM method for choosing the best compact fluorescent lamp. International science conference, 18-19

[17]  Jamali, G., Farrokhnejad, K., & Mohammadi, M. (2015). Decision making on analyzing advanced manufacturing systems dimensions: SWARA and COPRAS G integration (Case study: automotive industry). Buletin teknologi tanaman12(2), 266-274.

[18]  Pamučar, D., Božanić, D., Lukovac, V., & Komazec, N. (2018). Normalized weighted geometric bonferroni mean operator of interval rough numbers–application in interval rough dematel-copras model. Facta universitatis, series: mechanical engineering16(2), 171-191.

[19]  Zarbakhshnia, N., Soleimani, H., & Ghaderi, H. (2018). Sustainable third-party reverse logistics provider evaluation and selection using fuzzy SWARA and developed fuzzy COPRAS in the presence of risk criteria. Applied soft computing65, 307-319.

[20]  Hassanpour, M. (2019). Evaluation of Iranian textile and leather industries. Journal of applied research on industrial engineering6(1), 33-51.

[21]  Hassanpour, M. (2018). Hierarchical cluster classification of Iranian food manufacturing and processing industries. Journal of food safety and hygiene4(1/2), 27-40.

[22]  Gabriel, M., & Pessl, E. (2016). Industry 4.0 and sustainability impacts: Critical discussion of sustainability aspects with a special focus on future of work and ecological consequences. Annals of the faculty of engineering hunedoara14(2), 131.

[23]  Hassanpour, M. (2018). Evaluation of Iranian plastic industries. Jornal of waste recycling3(2), 11.

[24]  Shailaja, K., & Hassanpour, M. (2018). Iranian food manufacturing and processing industries. Rheol: open access2(111).

[25]  Giljum, S., Bruckner, M., & Martinez, A. (2015). Material footprint assessment in a global input‐output framework. Journal of industrial ecology19(5), 792-804.