Application of line balancing heuristics for achieving an effective layout: a case study.

Document Type: Research Paper

Authors

Department of Industrial Engineering and Management (IEM), Khulna University of Engineering and Technology (KUET), Khulna-9203, Bangladesh.

10.22105/riej.2020.234612.1134

Abstract

This project is a case study conducted in a manufacturing company aiming at improving its productivity using line balancing techniques. Waste reduction, especially the time waste, is an important factor to shrink the manufacturing cost. The main purpose of this project is to suggest a better line balancing approach with an aim of reducing the idle time, work station number, and manpower requirement while improving the efficiency to meet the target production in the apparel manufacturing organization. For accomplishing the purpose, different line balancing methods named Largest Candidate Rule, Kilbridge & Wester method, and Ranked Positional Weight method carried out for analyzing the line efficiency, production rate, work station number, manpower requirement, and time utilization. Finally, an efficient and balanced line were proposed with respect to the auspicious outcome of the production area. Also, by using the line balancing techniques, a new sequence of work has been developed to arrange the work elements into the workstation. Some optimum layout has been proposed that has minimized the idle time and manpower requirement.

Keywords

Main Subjects


[1]     Ponnambalam, S. G., Aravindan, P., & Naidu, G. M. (2000). A multi-objective genetic algorithm for solving assembly line balancing problem. The international journal of advanced manufacturing technology16(5), 341-352.

[2]     Kitaw, D., Matebu, A., & Tadesse, S. (2010). Assembly line balancing using simulation technique in a garment manufacturing firm. Zede journal27, 69-80.

[3]     Nakamura, M., Sakakibara, S., & Schroeder, R. (1998). Adoption of just-in-time manufacturing methods at US-and Japanese-owned plants: some empirical evidence. IEEE transactions on engineering management45(3), 230-240.

[4]     Jaganathan, V. P. (2014). Line balancing using largest candidate rule algorithm in a garment industry: a case study. International journal of lean thinking5(1).

[5]     Unuigbe, A. I., Unuigbe, H. A., Aigboje, E. O., & Ehizibue, P. A. (2016). Assembly line balancing using fuzzy logic: a case study of a tricycle assembly line. Open journal of optimization5(2), 59-70.

[6]     Pearce, B. (2015). A study on general assembly line balancing modeling methods and techniques. (Doctoral Desertion, Clemson University). Retrieved from https://tigerprints.clemson.edu/cgi/viewcontent.cgi?referer=https://scholar.google.com/&httpsredir=1&article=2550&context=all_dissertations

[7]     Bahadır, S. K. (2011). Assembly line balancing in garment production by simulation. Assembly line–theory and practice. InTech.

[8]     [Hisham, S. F. B. (2013). Assembly line balancing improvement: a case study in an electronic industry (Doctoral dissertation, University Malaysia Pahang). Retrieved from http://umpir.ump.edu.my/id/eprint/7583/1/CD7724.pdf

[9]     Van Hop, N. (2006). A heuristic solution for fuzzy mixed-model line balancing problem. European journal of operational research168(3), 798-810.

[10] Jaggi, A., Patra, S., & Chaubey, D. S. (2015). Application of line-balancing to minimize the idle time of workstations in the production line with special reference to automobile industry. International journal of, 4(7), 8-12.

[11]  Gurjar, D. S. M. K. (2019). A review of balancing assembly line using Pso algorithm. International journal of scientific research & engineering trends, 5(3).

[12] Mazany, P. (1995). A case study: Lessons from the progressive implementation of just-in-time in a small knitwear manufacturer. International journal of operations & production management, 15(9), 271-288. https://doi.org/10.1108/01443579510099788

[13] Erel, E., & Sarin, S. C. (1998). A survey of the assembly line balancing procedures. Production planning & control9(5), 414-434.

[14] Kayar, M., & Akyalçin, Ö. C. (2014). Applying different heuristic assembly line balancing methods in the apparel industry and their comparison. Fibres & textiles in Eastern Europe, 6(108), 8-19.

[15] Chen, J. C., Chen, C. C., Su, L. H., Wu, H. B., & Sun, C. J. (2012). Assembly line balancing in garment industry. Expert Systems with Applications39(11), 10073-10081.

[16] Ramlan, R., & Tan, G. F. (2012). Cycle time reduction of a garment manufacturing company using simulation technique. Proceedings international conference of technology management, business and entrepreneurship 2012 (ICTEMB2012). Melaka, Malaysia.
http://eprints.uthm.edu.my/id/eprint/3521

[17] Islam, M. M., Mohiuddin, H. M., Mehidi, S. H., & Sakib, N. (2014). An optimal layout design in an apparel industry by appropriate line balancing: A case study. Global journal of research in engineering, 14(5). https://engineeringresearch.org/index.php/GJRE/article/view/1231

[18] Timilsina, B. (2012). Removing bottleneck from a manufacturing unit: A case studies to BETKER OY, Ylivieska-84100, Finland (Doctoral thesis, central Ostrobothnia university of applied sciences, Ylivieska unit). Retrieved from https://www.theseus.fi/bitstream/handle/10024/44630/Timilsina_Binod.pdf?sequ

[19] Boysen, N., Fliedner, M., & Scholl, A. (2007). A classification of assembly line balancing problems. European journal of operational research183(2), 674-693.

[20] Wickramasekara, A. N., & Perera, H. S. C. (2016). An improved approach to line balancing for garment manufacturing. Vidyodaya journal of management2(1).

[21] Zhu, L., Chen, J., Di, Z., Chen, L., Liu, Y., & Stanley, H. E. (2017). The mechanisms of labor division from the perspective of individual optimization. Physica A: statistical mechanics and its applications488, 112-120.

[22] Groover, M. P. (2016). Automation, production systems, and computer-integrated manufacturing. Pearson Education India.

[23] Groover, M., & Zimmers, E. W. J. R. (1983). CAD/CAM: computer-aided design and manufacturing. Pearson Education.

[24] Great, O. E., & Offiong, A. N. I. E. K. A. N. (2013). Productivity improvement in breweries through line balancing Using Heuristic Method. Int. J. Eng. Sci. Technol5(3), 475-486.

[25] Salveson, M. (1953). Bank debits and income payments by regions, PAUL B. SIMPsoN, University. Econometrica: journal of the econometric society21, 174.

[26] Grzechca, w. (2011, august). Cycle time in Assembly Line Balancing Problem. 2011 21st international conference on systems engineering (pp. 171-174). IEEE.