Facility location, layout, design, and materials handling
Davood Darvishi; Hassan Ahmadi Choukolaei; Soheil Shafaee
Abstract
All governments especially those having a high risk of natural disasters must have a comprehensive and implementable plan. In Iran, the placement of relief centers for the injured is usually done experimentally by relief organizations without considering the necessary standards. In this research, according ...
Read More
All governments especially those having a high risk of natural disasters must have a comprehensive and implementable plan. In Iran, the placement of relief centers for the injured is usually done experimentally by relief organizations without considering the necessary standards. In this research, according to the crisis management standard, the criteria are classified and determined as layers of information in the Geographic Information System (GIS). Then, the selected relief centers in the study area were evaluated according to the standard criteria and using the obtained matrix, the research criteria were weighed by entropy method. Finally, using net flows, performance scores and research constraints, the optimal options were identified by the PROMETHEE 5 method. The strengths and weaknesses of each of these options were also assessed. The results showed that half of the relief centers considered in the region were not optimal and had poor performance in most of the effective and important criteria for locating relief centers. Criteria of population density and distance from worn tissue were the most important criteria in this study.
Facility location, layout, design, and materials handling
Hossein Jafari; Abbas Sheykhan
Abstract
Layout design problem is one of the useful field of study used to increase the efficiency of sources in organizations. In order to achieve an appropriate layout design, it is necessary to define and solve the related nonlinear programming problems. Therefore, using computer in solving the related problems ...
Read More
Layout design problem is one of the useful field of study used to increase the efficiency of sources in organizations. In order to achieve an appropriate layout design, it is necessary to define and solve the related nonlinear programming problems. Therefore, using computer in solving the related problems is important in the view of the researchers of this area of study. However, the designs produced by a computer to solve big problems require more time, so, this paper suggests an algorithm that can be useful in better performance of the known algorithms such as Branch and Bound. The proposed study aims to improve the performance of the branch and bound (BB) algorithm in solving QAP problems. The findings show that the proposed method enables the BB algorithm to produce an optimal solution in the minimum amount of time.
Facility location, layout, design, and materials handling
H. Jafari; M. Ehsanifar; A. Sheykhan
Abstract
The Quadratic Assignment Problem (QAP) is one of the problems of combinatorial optimization belonging to the NP-hard problems’ class and has a wide application in the placement of facilities. Thus far, many efforts have been made to solve this problem and countless algorithms have been developed ...
Read More
The Quadratic Assignment Problem (QAP) is one of the problems of combinatorial optimization belonging to the NP-hard problems’ class and has a wide application in the placement of facilities. Thus far, many efforts have been made to solve this problem and countless algorithms have been developed to achieve the optimal solutions; one of which is the Simulated Annealing (SA) algorithm. This paper aims at finding a suitable layout for the facilities of an industrial workshop by using a Developed Simulated Annealing (DSA) method.
Facility location, layout, design, and materials handling
N. Moradi; Sh. Shadrokh
Abstract
Construction Site Layout Planning (CSLP) is an important problem because of its impact on time, cost, productivity, and safety of the projects. In this paper, CSLP is formulated by the Quadratic Assignment Problem (QAP). At first, two case studies including equal and un-equal area facilities are solved ...
Read More
Construction Site Layout Planning (CSLP) is an important problem because of its impact on time, cost, productivity, and safety of the projects. In this paper, CSLP is formulated by the Quadratic Assignment Problem (QAP). At first, two case studies including equal and un-equal area facilities are solved by the simulated annealing optimization algorithm. Then, the obtained results are compared with the other papers. The comparisons show that the proposed Simulated Annealing (SA) is as efficient as ACO, PSO, CBO, ECBO, WOA, WOA-CBO, and ACO-PA which have been proposed by other papers for the same problems. As a result, the comparisons show that SA is as capable as other meta-heuristics of solving the combinatorial optimization problems like CSLP, while the hardware properties and computational times have been compared. Besides the comparisons, the design of experiments shows the relationship between each SA parameter and the computational time of the algorithm. Also, the history of convergence of the proposed SA indicates the high speed of reaching the optimal solution and the artificial intelligence of the proposed SA.
Facility location, layout, design, and materials handling
M. S. Rahman; M. I. Ali; U. Hossain; T. K. Mondal
Abstract
In present’s, the location selection problems play an important role for the top-level manager or entrepreneur for opening a new manufacturing company or relocate or expand their operation. As an engineered material, the plastic is used for manufacturing a wide variety of domestic products. For ...
Read More
In present’s, the location selection problems play an important role for the top-level manager or entrepreneur for opening a new manufacturing company or relocate or expand their operation. As an engineered material, the plastic is used for manufacturing a wide variety of domestic products. For this reason, the plastic manufacturing industries are growing in Bangladesh through the last two eras. This paper might be helpful to select a new location or expansion of the existing one in Bangladesh for the plastic manufacturing company. In this study, we have taken five commercial districts as location and ten criteria for deep consideration from all promising sites of Bangladesh.For this purpose, data has collected through surveying and questionnaires. Then, the Analytic Hierarchy Process (AHP) has used to make a preference measure to select the best location for plastic manufacturing industries. From the comparison value of the composite weight, it can be found that Mongla is the best alternative location for the decision problems.
Case studies in industry and services
S. M. Arabzad; M. Ghorbani; M. J. Ranjbar
Abstract
This paper presents a mathematical model for a facility location-allocation problem in order to design an integrated supply chain. We consider a supply chain including multiple suppliers, multiple products, multiple plants, multiple transportation alternatives and multiple customer zones. The problem ...
Read More
This paper presents a mathematical model for a facility location-allocation problem in order to design an integrated supply chain. We consider a supply chain including multiple suppliers, multiple products, multiple plants, multiple transportation alternatives and multiple customer zones. The problem is to determine a number and capacity level of plants, allocation of customers demand, and selection and order allocation of suppliers. A multi-objective mixed-integer linear programming (MOMILP) is presented with two conflicting objectives simultaneously. The first objective is to minimize the total costs of a supply chain including raw material costs, transportation costs and establishment costs of plants. The second objective function aims to minimize the total deterioration rate occurred by transportation alternatives. Finally, by applying the fuzzy goal programming, the model is solved as a single objective mixed-integer programming model. An experiment study shows that the proposed procedure can provide a promising result to design an efficient supply chain.
